; RUN: llc < %s -mtriple=x86_64-linux -O0 | FileCheck %s --check-prefix=X64
; RUN: llc < %s -mtriple=x86_64-windows-itanium -O0 | FileCheck %s --check-prefix=X64
; RUN: llc < %s -mtriple=i686-- -O0 | FileCheck %s --check-prefix=X32
; GEP indices are interpreted as signed integers, so they
; should be sign-extended to 64 bits on 64-bit targets.
; PR3181
define i32 @test1(i32 %t3, ptr %t1) nounwind {
%t9 = getelementptr i32, ptr %t1, i32 %t3 ; <ptr> [#uses=1]
%t15 = load i32, ptr %t9 ; <i32> [#uses=1]
ret i32 %t15
; X32-LABEL: test1:
; X32: movl (%eax,%ecx,4), %eax
; X32: ret
; X64-LABEL: test1:
; X64: movslq %e[[A0:di|cx]], %rax
; X64: movl (%r[[A1:si|dx]],%rax,4), %eax
; X64: ret
}
define i32 @test2(i64 %t3, ptr %t1) nounwind {
%t9 = getelementptr i32, ptr %t1, i64 %t3 ; <ptr> [#uses=1]
%t15 = load i32, ptr %t9 ; <i32> [#uses=1]
ret i32 %t15
; X32-LABEL: test2:
; X32: movl ({{%e[a-z]+}},{{%e[a-z]+}},4), %e
; X32: ret
; X64-LABEL: test2:
; X64: movl (%r[[A1]],%r[[A0]],4), %eax
; X64: ret
}
; PR4984
define i8 @test3(ptr %start) nounwind {
entry:
%A = getelementptr i8, ptr %start, i64 -2 ; <ptr> [#uses=1]
%B = load i8, ptr %A, align 1 ; <i8> [#uses=1]
ret i8 %B
; X32-LABEL: test3:
; X32: movl 4(%esp), %eax
; X32: movb -2(%eax), %al
; X32: ret
; X64-LABEL: test3:
; X64: movb -2(%r[[A0]]), %al
; X64: ret
}
define double @test4(i64 %x, ptr %p) nounwind {
entry:
%x.addr = alloca i64, align 8 ; <ptr> [#uses=2]
%p.addr = alloca ptr, align 8 ; <ptr> [#uses=2]
store i64 %x, ptr %x.addr
store ptr %p, ptr %p.addr
%tmp = load i64, ptr %x.addr ; <i64> [#uses=1]
%add = add nsw i64 %tmp, 16 ; <i64> [#uses=1]
%tmp1 = load ptr, ptr %p.addr ; <ptr> [#uses=1]
%arrayidx = getelementptr inbounds double, ptr %tmp1, i64 %add ; <ptr> [#uses=1]
%tmp2 = load double, ptr %arrayidx ; <double> [#uses=1]
ret double %tmp2
; X32-LABEL: test4:
; X32: 128(%e{{.*}},%e{{.*}},8)
; X64-LABEL: test4:
; X64: 128(%r{{.*}},%r{{.*}},8)
}
; PR8961 - Make sure the sext for the GEP addressing comes before the load that
; is folded.
define i64 @test5(ptr %A, i32 %I, i64 %B) nounwind {
%v8 = getelementptr i8, ptr %A, i32 %I
%v10 = load i64, ptr %v8
%v11 = add i64 %B, %v10
ret i64 %v11
; X64-LABEL: test5:
; X64: movslq %e[[A1]], [[R0:%r[a-z]+]]
; X64-NEXT: (%r[[A0]],[[R0]]),
; X64: ret
}
; PR9500, rdar://9156159 - Don't do non-local address mode folding,
; because it may require values which wouldn't otherwise be live out
; of their blocks.
define void @test6() personality ptr @__gxx_personality_v0 {
if.end: ; preds = %if.then, %invoke.cont
%tmp15 = load i64, ptr undef
%dec = add i64 %tmp15, 13
store i64 %dec, ptr undef
%call17 = invoke ptr @_ZNK18G__FastAllocString4dataEv()
to label %invoke.cont16 unwind label %lpad
invoke.cont16: ; preds = %if.then14
%arrayidx18 = getelementptr inbounds i8, ptr %call17, i64 %dec
store i8 0, ptr %arrayidx18
unreachable
lpad: ; preds = %if.end19, %if.then14, %if.end, %entry
%exn = landingpad {ptr, i32}
cleanup
unreachable
}
declare ptr @_ZNK18G__FastAllocString4dataEv() nounwind
; PR10605 / rdar://9930964 - Don't fold loads incorrectly. The load should
; happen before the store.
define i32 @test7(ptr %tmp1, i32 %tmp71, i32 %tmp63) nounwind {
; X64-LABEL: test7:
; X64: movl 8({{%rdi|%rcx}}), %eax
; X64: movl $4, 8({{%rdi|%rcx}})
%tmp29 = getelementptr inbounds {i32,i32,i32}, ptr %tmp1, i32 0, i32 2
%tmp30 = load i32, ptr %tmp29, align 4
%p2 = getelementptr inbounds {i32,i32,i32}, ptr %tmp1, i32 0, i32 2
store i32 4, ptr %p2
%tmp72 = or i32 %tmp71, %tmp30
%tmp73 = icmp ne i32 %tmp63, 32
br i1 %tmp73, label %T, label %F
T:
ret i32 %tmp72
F:
ret i32 4
}
declare i32 @__gxx_personality_v0(...)