; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py UTC_ARGS: --version 5
; RUN: opt -passes='print<access-info>' -disable-output %s 2>&1 | FileCheck %s
target datalayout = "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64"
; FIXME: Start == End for access group with AddRec.
define void @runtime_checks_with_symbolic_max_btc_neg_1(ptr %P, ptr %S, i32 %x, i32 %y) {
; CHECK-LABEL: 'runtime_checks_with_symbolic_max_btc_neg_1'
; CHECK-NEXT: loop:
; CHECK-NEXT: Memory dependences are safe with run-time checks
; CHECK-NEXT: Dependences:
; CHECK-NEXT: Run-time memory checks:
; CHECK-NEXT: Check 0:
; CHECK-NEXT: Comparing group ([[GRP1:0x[0-9a-f]+]]):
; CHECK-NEXT: %gep.iv = getelementptr inbounds i32, ptr %P, i32 %iv
; CHECK-NEXT: Against group ([[GRP2:0x[0-9a-f]+]]):
; CHECK-NEXT: ptr %S
; CHECK-NEXT: Grouped accesses:
; CHECK-NEXT: Group [[GRP1]]:
; CHECK-NEXT: (Low: ((4 * %y) + %P) High: ((4 * %y) + %P))
; CHECK-NEXT: Member: {((4 * %y) + %P),+,4}<%loop>
; CHECK-NEXT: Group [[GRP2]]:
; CHECK-NEXT: (Low: %S High: (4 + %S))
; CHECK-NEXT: Member: %S
; CHECK-EMPTY:
; CHECK-NEXT: Non vectorizable stores to invariant address were not found in loop.
; CHECK-NEXT: SCEV assumptions:
; CHECK-EMPTY:
; CHECK-NEXT: Expressions re-written:
;
entry:
br label %loop
loop:
%iv = phi i32 [ %y, %entry ], [ %iv.next, %loop ]
%gep.iv = getelementptr inbounds i32, ptr %P, i32 %iv
%l = load i32, ptr %S
store i32 %l, ptr %gep.iv, align 4
%iv.next = add nsw i32 %iv, 1
%c.2 = icmp slt i32 %iv.next, %l
br i1 %c.2, label %loop, label %exit
exit:
ret void
}
; FIXME: Start > End for access group with AddRec.
define void @runtime_check_with_symbolic_max_btc_neg_2(ptr %P, ptr %S, i32 %x, i32 %y) {
; CHECK-LABEL: 'runtime_check_with_symbolic_max_btc_neg_2'
; CHECK-NEXT: loop:
; CHECK-NEXT: Memory dependences are safe with run-time checks
; CHECK-NEXT: Dependences:
; CHECK-NEXT: Run-time memory checks:
; CHECK-NEXT: Check 0:
; CHECK-NEXT: Comparing group ([[GRP3:0x[0-9a-f]+]]):
; CHECK-NEXT: %gep.iv = getelementptr inbounds i32, ptr %P, i32 %iv
; CHECK-NEXT: Against group ([[GRP4:0x[0-9a-f]+]]):
; CHECK-NEXT: ptr %S
; CHECK-NEXT: Grouped accesses:
; CHECK-NEXT: Group [[GRP3]]:
; CHECK-NEXT: (Low: ((4 * %y) + %P) High: (-4 + (4 * %y) + %P))
; CHECK-NEXT: Member: {((4 * %y) + %P),+,4}<%loop>
; CHECK-NEXT: Group [[GRP4]]:
; CHECK-NEXT: (Low: %S High: (4 + %S))
; CHECK-NEXT: Member: %S
; CHECK-EMPTY:
; CHECK-NEXT: Non vectorizable stores to invariant address were not found in loop.
; CHECK-NEXT: SCEV assumptions:
; CHECK-EMPTY:
; CHECK-NEXT: Expressions re-written:
;
entry:
br label %loop
loop:
%iv = phi i32 [ %y, %entry ], [ %iv.next, %loop ]
%gep.iv = getelementptr inbounds i32, ptr %P, i32 %iv
%l = load i32, ptr %S
store i32 %l, ptr %gep.iv, align 4
%iv.next = add nsw i32 %iv, 1
%a = and i32 %l, -2
%c.2 = icmp slt i32 %iv.next, %a
br i1 %c.2, label %loop, label %exit
exit:
ret void
}
define i32 @check_no_dep_via_bounds_compare_symbolic_max_btc_neg_1(ptr %P, i32 %x, i32 %y) {
; CHECK-LABEL: 'check_no_dep_via_bounds_compare_symbolic_max_btc_neg_1'
; CHECK-NEXT: loop:
; CHECK-NEXT: Report: unsafe dependent memory operations in loop. Use #pragma clang loop distribute(enable) to allow loop distribution to attempt to isolate the offending operations into a separate loop
; CHECK-NEXT: Unknown data dependence.
; CHECK-NEXT: Dependences:
; CHECK-NEXT: Unknown:
; CHECK-NEXT: store i64 0, ptr %gep.iv, align 4 ->
; CHECK-NEXT: %l.2 = load i32, ptr %gep.P.4, align 4
; CHECK-EMPTY:
; CHECK-NEXT: Unknown:
; CHECK-NEXT: %l = load i32, ptr %gep.iv, align 4 ->
; CHECK-NEXT: store i64 0, ptr %gep.iv, align 4
; CHECK-EMPTY:
; CHECK-NEXT: Run-time memory checks:
; CHECK-NEXT: Grouped accesses:
; CHECK-EMPTY:
; CHECK-NEXT: Non vectorizable stores to invariant address were not found in loop.
; CHECK-NEXT: SCEV assumptions:
; CHECK-NEXT: {(8 + (8 * %y) + %P),+,8}<%loop> Added Flags: <nusw>
; CHECK-EMPTY:
; CHECK-NEXT: Expressions re-written:
;
entry:
%gep.P.4 = getelementptr inbounds nuw i8, ptr %P, i32 4
%gep.P.8 = getelementptr inbounds nuw i8, ptr %P, i32 8
br label %loop
loop:
%1 = phi i32 [ %x, %entry ], [ %sel, %loop.latch ]
%iv = phi i32 [ %y, %entry ], [ %iv.next, %loop.latch ]
%gep.iv = getelementptr inbounds i64, ptr %gep.P.8, i32 %iv
%l = load i32, ptr %gep.iv, align 4
%c.1 = icmp eq i32 %l, 3
br i1 %c.1, label %loop.latch, label %if.then
if.then: ; preds = %for.body
store i64 0, ptr %gep.iv, align 4
%l.2 = load i32, ptr %gep.P.4
br label %loop.latch
loop.latch:
%sel = phi i32 [ %l.2, %if.then ], [ %1, %loop ]
%iv.next = add nsw i32 %iv, 1
%c.2 = icmp slt i32 %iv.next, %sel
br i1 %c.2, label %loop, label %exit
exit:
%res = phi i32 [ %iv.next, %loop.latch ]
ret i32 %res
}
Codebase Browser
llvm