llvm/llvm/test/tools/llvm-mca/X86/Znver3/one-idioms-avx-xmm.s

# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=znver3 -timeline -timeline-max-iterations=2 -register-file-stats -iterations=1000 < %s | FileCheck %s

# LLVM-MCA-BEGIN
vpcmpeqb %xmm0, %xmm0, %xmm0
vpaddb %xmm0, %xmm0, %xmm0
# LLVM-MCA-END

# LLVM-MCA-BEGIN
vpcmpeqw %xmm0, %xmm0, %xmm0
vpaddw %xmm0, %xmm0, %xmm0
# LLVM-MCA-END

# LLVM-MCA-BEGIN
vpcmpeqd %xmm0, %xmm0, %xmm0
vpaddd %xmm0, %xmm0, %xmm0
# LLVM-MCA-END

# LLVM-MCA-BEGIN
vpcmpeqq %xmm0, %xmm0, %xmm0
vpaddq %xmm0, %xmm0, %xmm0
# LLVM-MCA-END

# CHECK:      [0] Code Region

# CHECK:      Iterations:        1000
# CHECK-NEXT: Instructions:      2000
# CHECK-NEXT: Total Cycles:      504
# CHECK-NEXT: Total uOps:        2000

# CHECK:      Dispatch Width:    6
# CHECK-NEXT: uOps Per Cycle:    3.97
# CHECK-NEXT: IPC:               3.97
# CHECK-NEXT: Block RThroughput: 0.5

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     0.25                        vpcmpeqb	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:  1      1     0.25                        vpaddb	%xmm0, %xmm0, %xmm0

# CHECK:      Register File statistics:
# CHECK-NEXT: Total number of mappings created:    2000
# CHECK-NEXT: Max number of mappings used:         74

# CHECK:      *  Register File #1 -- Zn3FpPRF:
# CHECK-NEXT:    Number of physical registers:     160
# CHECK-NEXT:    Total number of mappings created: 2000
# CHECK-NEXT:    Max number of mappings used:      74

# CHECK:      *  Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT:    Number of physical registers:     192
# CHECK-NEXT:    Total number of mappings created: 0
# CHECK-NEXT:    Max number of mappings used:      0

# CHECK:      Resources:
# CHECK-NEXT: [0]   - Zn3AGU0
# CHECK-NEXT: [1]   - Zn3AGU1
# CHECK-NEXT: [2]   - Zn3AGU2
# CHECK-NEXT: [3]   - Zn3ALU0
# CHECK-NEXT: [4]   - Zn3ALU1
# CHECK-NEXT: [5]   - Zn3ALU2
# CHECK-NEXT: [6]   - Zn3ALU3
# CHECK-NEXT: [7]   - Zn3BRU1
# CHECK-NEXT: [8]   - Zn3FP0
# CHECK-NEXT: [9]   - Zn3FP1
# CHECK-NEXT: [10]  - Zn3FP2
# CHECK-NEXT: [11]  - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13]  - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12.0] [12.1] [13]   [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.50   0.50   0.50   0.50    -      -      -      -      -      -      -      -      -      -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12.0] [12.1] [13]   [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.25   0.25   0.50    -      -      -      -      -      -      -      -      -      -      -      -     vpcmpeqb	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.25   0.25    -     0.50    -      -      -      -      -      -      -      -      -      -      -     vpaddb	%xmm0, %xmm0, %xmm0

# CHECK:      Timeline view:
# CHECK-NEXT: Index     01234

# CHECK:      [0,0]     DeER.   vpcmpeqb	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [0,1]     D=eER   vpaddb	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [1,0]     DeE-R   vpcmpeqb	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [1,1]     D=eER   vpaddb	%xmm0, %xmm0, %xmm0

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     2     1.0    1.0    0.5       vpcmpeqb	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: 1.     2     2.0    0.0    0.0       vpaddb	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:        2     1.5    0.5    0.3       <total>

# CHECK:      [1] Code Region

# CHECK:      Iterations:        1000
# CHECK-NEXT: Instructions:      2000
# CHECK-NEXT: Total Cycles:      504
# CHECK-NEXT: Total uOps:        2000

# CHECK:      Dispatch Width:    6
# CHECK-NEXT: uOps Per Cycle:    3.97
# CHECK-NEXT: IPC:               3.97
# CHECK-NEXT: Block RThroughput: 0.5

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     0.25                        vpcmpeqw	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:  1      1     0.25                        vpaddw	%xmm0, %xmm0, %xmm0

# CHECK:      Register File statistics:
# CHECK-NEXT: Total number of mappings created:    2000
# CHECK-NEXT: Max number of mappings used:         74

# CHECK:      *  Register File #1 -- Zn3FpPRF:
# CHECK-NEXT:    Number of physical registers:     160
# CHECK-NEXT:    Total number of mappings created: 2000
# CHECK-NEXT:    Max number of mappings used:      74

# CHECK:      *  Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT:    Number of physical registers:     192
# CHECK-NEXT:    Total number of mappings created: 0
# CHECK-NEXT:    Max number of mappings used:      0

# CHECK:      Resources:
# CHECK-NEXT: [0]   - Zn3AGU0
# CHECK-NEXT: [1]   - Zn3AGU1
# CHECK-NEXT: [2]   - Zn3AGU2
# CHECK-NEXT: [3]   - Zn3ALU0
# CHECK-NEXT: [4]   - Zn3ALU1
# CHECK-NEXT: [5]   - Zn3ALU2
# CHECK-NEXT: [6]   - Zn3ALU3
# CHECK-NEXT: [7]   - Zn3BRU1
# CHECK-NEXT: [8]   - Zn3FP0
# CHECK-NEXT: [9]   - Zn3FP1
# CHECK-NEXT: [10]  - Zn3FP2
# CHECK-NEXT: [11]  - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13]  - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12.0] [12.1] [13]   [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.50   0.50   0.50   0.50    -      -      -      -      -      -      -      -      -      -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12.0] [12.1] [13]   [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.25   0.25   0.50    -      -      -      -      -      -      -      -      -      -      -      -     vpcmpeqw	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.25   0.25    -     0.50    -      -      -      -      -      -      -      -      -      -      -     vpaddw	%xmm0, %xmm0, %xmm0

# CHECK:      Timeline view:
# CHECK-NEXT: Index     01234

# CHECK:      [0,0]     DeER.   vpcmpeqw	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [0,1]     D=eER   vpaddw	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [1,0]     DeE-R   vpcmpeqw	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [1,1]     D=eER   vpaddw	%xmm0, %xmm0, %xmm0

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     2     1.0    1.0    0.5       vpcmpeqw	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: 1.     2     2.0    0.0    0.0       vpaddw	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:        2     1.5    0.5    0.3       <total>

# CHECK:      [2] Code Region

# CHECK:      Iterations:        1000
# CHECK-NEXT: Instructions:      2000
# CHECK-NEXT: Total Cycles:      504
# CHECK-NEXT: Total uOps:        2000

# CHECK:      Dispatch Width:    6
# CHECK-NEXT: uOps Per Cycle:    3.97
# CHECK-NEXT: IPC:               3.97
# CHECK-NEXT: Block RThroughput: 0.5

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     0.25                        vpcmpeqd	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:  1      1     0.25                        vpaddd	%xmm0, %xmm0, %xmm0

# CHECK:      Register File statistics:
# CHECK-NEXT: Total number of mappings created:    2000
# CHECK-NEXT: Max number of mappings used:         74

# CHECK:      *  Register File #1 -- Zn3FpPRF:
# CHECK-NEXT:    Number of physical registers:     160
# CHECK-NEXT:    Total number of mappings created: 2000
# CHECK-NEXT:    Max number of mappings used:      74

# CHECK:      *  Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT:    Number of physical registers:     192
# CHECK-NEXT:    Total number of mappings created: 0
# CHECK-NEXT:    Max number of mappings used:      0

# CHECK:      Resources:
# CHECK-NEXT: [0]   - Zn3AGU0
# CHECK-NEXT: [1]   - Zn3AGU1
# CHECK-NEXT: [2]   - Zn3AGU2
# CHECK-NEXT: [3]   - Zn3ALU0
# CHECK-NEXT: [4]   - Zn3ALU1
# CHECK-NEXT: [5]   - Zn3ALU2
# CHECK-NEXT: [6]   - Zn3ALU3
# CHECK-NEXT: [7]   - Zn3BRU1
# CHECK-NEXT: [8]   - Zn3FP0
# CHECK-NEXT: [9]   - Zn3FP1
# CHECK-NEXT: [10]  - Zn3FP2
# CHECK-NEXT: [11]  - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13]  - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12.0] [12.1] [13]   [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.50   0.50   0.50   0.50    -      -      -      -      -      -      -      -      -      -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12.0] [12.1] [13]   [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.25   0.25   0.50    -      -      -      -      -      -      -      -      -      -      -      -     vpcmpeqd	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.25   0.25    -     0.50    -      -      -      -      -      -      -      -      -      -      -     vpaddd	%xmm0, %xmm0, %xmm0

# CHECK:      Timeline view:
# CHECK-NEXT: Index     01234

# CHECK:      [0,0]     DeER.   vpcmpeqd	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [0,1]     D=eER   vpaddd	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [1,0]     DeE-R   vpcmpeqd	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [1,1]     D=eER   vpaddd	%xmm0, %xmm0, %xmm0

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     2     1.0    1.0    0.5       vpcmpeqd	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: 1.     2     2.0    0.0    0.0       vpaddd	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:        2     1.5    0.5    0.3       <total>

# CHECK:      [3] Code Region

# CHECK:      Iterations:        1000
# CHECK-NEXT: Instructions:      2000
# CHECK-NEXT: Total Cycles:      504
# CHECK-NEXT: Total uOps:        2000

# CHECK:      Dispatch Width:    6
# CHECK-NEXT: uOps Per Cycle:    3.97
# CHECK-NEXT: IPC:               3.97
# CHECK-NEXT: Block RThroughput: 0.5

# CHECK:      Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)

# CHECK:      [1]    [2]    [3]    [4]    [5]    [6]    Instructions:
# CHECK-NEXT:  1      1     0.50                        vpcmpeqq	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:  1      1     0.25                        vpaddq	%xmm0, %xmm0, %xmm0

# CHECK:      Register File statistics:
# CHECK-NEXT: Total number of mappings created:    2000
# CHECK-NEXT: Max number of mappings used:         73

# CHECK:      *  Register File #1 -- Zn3FpPRF:
# CHECK-NEXT:    Number of physical registers:     160
# CHECK-NEXT:    Total number of mappings created: 2000
# CHECK-NEXT:    Max number of mappings used:      73

# CHECK:      *  Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT:    Number of physical registers:     192
# CHECK-NEXT:    Total number of mappings created: 0
# CHECK-NEXT:    Max number of mappings used:      0

# CHECK:      Resources:
# CHECK-NEXT: [0]   - Zn3AGU0
# CHECK-NEXT: [1]   - Zn3AGU1
# CHECK-NEXT: [2]   - Zn3AGU2
# CHECK-NEXT: [3]   - Zn3ALU0
# CHECK-NEXT: [4]   - Zn3ALU1
# CHECK-NEXT: [5]   - Zn3ALU2
# CHECK-NEXT: [6]   - Zn3ALU3
# CHECK-NEXT: [7]   - Zn3BRU1
# CHECK-NEXT: [8]   - Zn3FP0
# CHECK-NEXT: [9]   - Zn3FP1
# CHECK-NEXT: [10]  - Zn3FP2
# CHECK-NEXT: [11]  - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13]  - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store

# CHECK:      Resource pressure per iteration:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12.0] [12.1] [13]   [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.50   0.50   0.50   0.50    -      -      -      -      -      -      -      -      -      -      -

# CHECK:      Resource pressure by instruction:
# CHECK-NEXT: [0]    [1]    [2]    [3]    [4]    [5]    [6]    [7]    [8]    [9]    [10]   [11]   [12.0] [12.1] [13]   [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT:  -      -      -      -      -      -      -      -     0.50   0.50    -      -      -      -      -      -      -      -      -      -      -      -      -     vpcmpeqq	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:  -      -      -      -      -      -      -      -      -      -     0.50   0.50    -      -      -      -      -      -      -      -      -      -      -     vpaddq	%xmm0, %xmm0, %xmm0

# CHECK:      Timeline view:
# CHECK-NEXT: Index     01234

# CHECK:      [0,0]     DeER.   vpcmpeqq	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [0,1]     D=eER   vpaddq	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [1,0]     DeE-R   vpcmpeqq	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: [1,1]     D=eER   vpaddq	%xmm0, %xmm0, %xmm0

# CHECK:      Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage

# CHECK:            [0]    [1]    [2]    [3]
# CHECK-NEXT: 0.     2     1.0    1.0    0.5       vpcmpeqq	%xmm0, %xmm0, %xmm0
# CHECK-NEXT: 1.     2     2.0    0.0    0.0       vpaddq	%xmm0, %xmm0, %xmm0
# CHECK-NEXT:        2     1.5    0.5    0.3       <total>