# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=x86-64 -iterations=500 < %s | FileCheck %s
# LLVM-MCA-BEGIN
cvtsi2ss %ecx, %xmm0
# LLVM-MCA-END
# LLVM-MCA-BEGIN
cvtsi2sd %ecx, %xmm0
# LLVM-MCA-END
# LLVM-MCA-BEGIN
movd %ecx, %xmm0
# LLVM-MCA-END
# LLVM-MCA-BEGIN
movq %rcx, %xmm0
# LLVM-MCA-END
# CHECK: [0] Code Region
# CHECK: Iterations: 500
# CHECK-NEXT: Instructions: 500
# CHECK-NEXT: Total Cycles: 2503
# CHECK-NEXT: Total uOps: 1500
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.60
# CHECK-NEXT: IPC: 0.20
# CHECK-NEXT: Block RThroughput: 2.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 3 5 2.00 cvtsi2ss %ecx, %xmm0
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - 1.00 - 2.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - 1.00 - 2.00 - - cvtsi2ss %ecx, %xmm0
# CHECK: [1] Code Region
# CHECK: Iterations: 500
# CHECK-NEXT: Instructions: 500
# CHECK-NEXT: Total Cycles: 2003
# CHECK-NEXT: Total uOps: 1000
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.50
# CHECK-NEXT: IPC: 0.25
# CHECK-NEXT: Block RThroughput: 1.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 2 4 1.00 cvtsi2sd %ecx, %xmm0
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - 1.00 - 1.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - 1.00 - 1.00 - - cvtsi2sd %ecx, %xmm0
# CHECK: [2] Code Region
# CHECK: Iterations: 500
# CHECK-NEXT: Instructions: 500
# CHECK-NEXT: Total Cycles: 503
# CHECK-NEXT: Total uOps: 500
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.99
# CHECK-NEXT: IPC: 0.99
# CHECK-NEXT: Block RThroughput: 1.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 1.00 movd %ecx, %xmm0
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - - - 1.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - - - 1.00 - - movd %ecx, %xmm0
# CHECK: [3] Code Region
# CHECK: Iterations: 500
# CHECK-NEXT: Instructions: 500
# CHECK-NEXT: Total Cycles: 503
# CHECK-NEXT: Total uOps: 500
# CHECK: Dispatch Width: 4
# CHECK-NEXT: uOps Per Cycle: 0.99
# CHECK-NEXT: IPC: 0.99
# CHECK-NEXT: Block RThroughput: 1.0
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 1.00 movq %rcx, %xmm0
# CHECK: Resources:
# CHECK-NEXT: [0] - SBDivider
# CHECK-NEXT: [1] - SBFPDivider
# CHECK-NEXT: [2] - SBPort0
# CHECK-NEXT: [3] - SBPort1
# CHECK-NEXT: [4] - SBPort4
# CHECK-NEXT: [5] - SBPort5
# CHECK-NEXT: [6.0] - SBPort23
# CHECK-NEXT: [6.1] - SBPort23
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1]
# CHECK-NEXT: - - - - - 1.00 - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6.0] [6.1] Instructions:
# CHECK-NEXT: - - - - - 1.00 - - movq %rcx, %xmm0
Codebase Browser
llvm