; Test strict 64-bit floating-point subtraction.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 \
; RUN: | FileCheck -check-prefix=CHECK -check-prefix=CHECK-SCALAR %s
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z13 | FileCheck %s
declare double @foo()
declare double @llvm.experimental.constrained.fsub.f64(double, double, metadata, metadata)
; Check register subtraction.
define double @f1(double %f1, double %f2) #0 {
; CHECK-LABEL: f1:
; CHECK: sdbr %f0, %f2
; CHECK: br %r14
%res = call double @llvm.experimental.constrained.fsub.f64(
double %f1, double %f2,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
ret double %res
}
; Check the low end of the SDB range.
define double @f2(double %f1, ptr %ptr) #0 {
; CHECK-LABEL: f2:
; CHECK: sdb %f0, 0(%r2)
; CHECK: br %r14
%f2 = load double, ptr %ptr
%res = call double @llvm.experimental.constrained.fsub.f64(
double %f1, double %f2,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
ret double %res
}
; Check the high end of the aligned SDB range.
define double @f3(double %f1, ptr %base) #0 {
; CHECK-LABEL: f3:
; CHECK: sdb %f0, 4088(%r2)
; CHECK: br %r14
%ptr = getelementptr double, ptr %base, i64 511
%f2 = load double, ptr %ptr
%res = call double @llvm.experimental.constrained.fsub.f64(
double %f1, double %f2,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
ret double %res
}
; Check the next doubleword up, which needs separate address logic.
; Other sequences besides this one would be OK.
define double @f4(double %f1, ptr %base) #0 {
; CHECK-LABEL: f4:
; CHECK: aghi %r2, 4096
; CHECK: sdb %f0, 0(%r2)
; CHECK: br %r14
%ptr = getelementptr double, ptr %base, i64 512
%f2 = load double, ptr %ptr
%res = call double @llvm.experimental.constrained.fsub.f64(
double %f1, double %f2,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
ret double %res
}
; Check negative displacements, which also need separate address logic.
define double @f5(double %f1, ptr %base) #0 {
; CHECK-LABEL: f5:
; CHECK: aghi %r2, -8
; CHECK: sdb %f0, 0(%r2)
; CHECK: br %r14
%ptr = getelementptr double, ptr %base, i64 -1
%f2 = load double, ptr %ptr
%res = call double @llvm.experimental.constrained.fsub.f64(
double %f1, double %f2,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
ret double %res
}
; Check that SDB allows indices.
define double @f6(double %f1, ptr %base, i64 %index) #0 {
; CHECK-LABEL: f6:
; CHECK: sllg %r1, %r3, 3
; CHECK: sdb %f0, 800(%r1,%r2)
; CHECK: br %r14
%ptr1 = getelementptr double, ptr %base, i64 %index
%ptr2 = getelementptr double, ptr %ptr1, i64 100
%f2 = load double, ptr %ptr2
%res = call double @llvm.experimental.constrained.fsub.f64(
double %f1, double %f2,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
ret double %res
}
; Check that subtractions of spilled values can use SDB rather than SDBR.
define double @f7(ptr %ptr0) #0 {
; CHECK-LABEL: f7:
; CHECK: brasl %r14, foo@PLT
; CHECK-SCALAR: sdb %f0, 16{{[04]}}(%r15)
; CHECK: br %r14
%ptr1 = getelementptr double, ptr %ptr0, i64 2
%ptr2 = getelementptr double, ptr %ptr0, i64 4
%ptr3 = getelementptr double, ptr %ptr0, i64 6
%ptr4 = getelementptr double, ptr %ptr0, i64 8
%ptr5 = getelementptr double, ptr %ptr0, i64 10
%ptr6 = getelementptr double, ptr %ptr0, i64 12
%ptr7 = getelementptr double, ptr %ptr0, i64 14
%ptr8 = getelementptr double, ptr %ptr0, i64 16
%ptr9 = getelementptr double, ptr %ptr0, i64 18
%ptr10 = getelementptr double, ptr %ptr0, i64 20
%val0 = load double, ptr %ptr0
%val1 = load double, ptr %ptr1
%val2 = load double, ptr %ptr2
%val3 = load double, ptr %ptr3
%val4 = load double, ptr %ptr4
%val5 = load double, ptr %ptr5
%val6 = load double, ptr %ptr6
%val7 = load double, ptr %ptr7
%val8 = load double, ptr %ptr8
%val9 = load double, ptr %ptr9
%val10 = load double, ptr %ptr10
%ret = call double @foo() #0
%sub0 = call double @llvm.experimental.constrained.fsub.f64(
double %ret, double %val0,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub1 = call double @llvm.experimental.constrained.fsub.f64(
double %sub0, double %val1,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub2 = call double @llvm.experimental.constrained.fsub.f64(
double %sub1, double %val2,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub3 = call double @llvm.experimental.constrained.fsub.f64(
double %sub2, double %val3,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub4 = call double @llvm.experimental.constrained.fsub.f64(
double %sub3, double %val4,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub5 = call double @llvm.experimental.constrained.fsub.f64(
double %sub4, double %val5,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub6 = call double @llvm.experimental.constrained.fsub.f64(
double %sub5, double %val6,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub7 = call double @llvm.experimental.constrained.fsub.f64(
double %sub6, double %val7,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub8 = call double @llvm.experimental.constrained.fsub.f64(
double %sub7, double %val8,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub9 = call double @llvm.experimental.constrained.fsub.f64(
double %sub8, double %val9,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
%sub10 = call double @llvm.experimental.constrained.fsub.f64(
double %sub9, double %val10,
metadata !"round.dynamic",
metadata !"fpexcept.strict") #0
ret double %sub10
}
attributes #0 = { strictfp }
Codebase Browser
llvm