## This test tests the behavior of --change-section-address option.
# RUN: yaml2obj -DTYPE=REL %s -o %ti1
## Basic check that the option processes wildcards and changes the address as expected.
# RUN: llvm-objcopy --change-section-address *+0x20 %ti1 %to1
# RUN: llvm-readelf --section-headers %to1 | FileCheck %s --check-prefix=CHECK-ADD-ALL
## Check that --change-section-address alias --adjust-section-vma produces the same output as the test above.
# RUN: llvm-objcopy --adjust-section-vma *+0x20 %ti1 %to2
# RUN: cmp %to1 %to2
## Check that negative adjustment reduces the address by the specified value.
# RUN: llvm-objcopy --change-section-address .anotherone-0x30 %ti1 %to3
# RUN: llvm-readelf --section-headers %to3 | FileCheck %s --check-prefix=CHECK-SUB-SECTION
## Check that a wildcard pattern works and only the specified sections are updated.
# RUN: llvm-objcopy --change-section-address .text*+0x20 %ti1 %to4
# RUN: llvm-readelf --section-headers %to4 | FileCheck %s --check-prefix=CHECK-ADD-PATTERN
## Check that regex pattern can be used with --change-section-address.
# RUN: llvm-objcopy --regex --change-section-address .text.+0x20 %ti1 %to5
# RUN: llvm-readelf --section-headers %to5 | FileCheck %s --check-prefix=CHECK-ADD-PATTERN
## Check that a section address can be set to a specific value.
# RUN: llvm-objcopy --change-section-address .text*=0x10 %ti1 %to6
# RUN: llvm-readelf --section-headers %to6 | FileCheck %s --check-prefix=CHECK-SET-PATTERN
## Check setting that a section address can be set to the maximum possible value (UINT64_MAX).
# RUN: llvm-objcopy --change-section-address .text2=0xffffffffffffffff %ti1 %to7
# RUN: llvm-readelf --section-headers %to7 | FileCheck %s --check-prefix=CHECK-MAX
## Check that a section address can be adjusted to the maximum possible value (UINT64_MAX).
# RUN: llvm-objcopy --change-section-address .text2+0xfffffffffffffdff %ti1 %to8
# RUN: llvm-readelf --section-headers %to8 | FileCheck %s --check-prefix=CHECK-MAX
## Check that the section address can be adjusted to the minimum possible value (0).
# RUN: llvm-objcopy --change-section-address .text2-0x200 %ti1 %to9
# RUN: llvm-readelf --section-headers %to9 | FileCheck %s --check-prefix=CHECK-ZERO
## Check that a section address can be adjusted by a maximum possible positive offset (UINT64_MAX).
# RUN: llvm-objcopy --change-section-address .text2=0 %ti1 %to10
# RUN: llvm-objcopy --change-section-address .text2+0xffffffffffffffff %to10 %to11
# RUN: llvm-readelf --section-headers %to11 | FileCheck %s --check-prefix=CHECK-MAX
## Check that a section address can be adjusted by a maximum possible negative offset (UINT64_MIN).
# RUN: llvm-objcopy --change-section-address .text2=0xffffffffffffffff %ti1 %to12
# RUN: llvm-objcopy --change-section-address .text2-0xffffffffffffffff %to12 %to13
# RUN: llvm-readelf --section-headers %to13 | FileCheck %s --check-prefix=CHECK-ZERO
## Check two independent changes.
# RUN: llvm-objcopy --change-section-address .text1=0x110 --change-section-address .text2=0x210 %ti1 %to14
# RUN: llvm-readelf --section-headers %to14 | FileCheck %s --check-prefix=CHECK-INDEPENDENT
## Check two overlapping changes.
# RUN: llvm-objcopy --change-section-address .anotherone-0x30 --change-section-address .anotherone+0x20 %ti1 %to15
# RUN: llvm-readelf --section-headers %to15 | FileCheck %s --check-prefix=CHECK-USE-LAST
## Check unused option.
# RUN: llvm-objcopy --change-section-address .anotherone=0x455 --change-section-address *+0x20 %ti1 %to16
# RUN: llvm-readelf --section-headers %to16 | FileCheck %s --check-prefix=CHECK-NOTSUPERSET-SET
## Check partial overlap (.anotherone overlaps).
# RUN: llvm-objcopy --change-section-address *+0x20 --change-section-address .anotherone=0x455 %ti1 %to17
# RUN: llvm-readelf --section-headers %to17 | FileCheck %s --check-prefix=CHECK-SUPERSET-SET
## Check more complex partial overlap (P1: .anotherone, .text2, P2: .text1, text2) (.text2 overlaps).
# RUN: llvm-objcopy --regex --change-section-address ".(text2|anotherone)+0x20" --change-section-address .text.*+0x30 %ti1 %to18
# RUN: llvm-readelf --section-headers %to18 | FileCheck %s --check-prefix=CHECK-PARTIAL-OVERLAP
# CHECK-ADD-ALL: [Nr] Name Type Address
# CHECK-ADD-ALL: .text1
# CHECK-ADD-ALL-SAME: 0000000000000120
# CHECK-ADD-ALL: .text2
# CHECK-ADD-ALL-SAME: 0000000000000220
# CHECK-ADD-ALL: .anotherone
# CHECK-ADD-ALL-SAME: 0000000000000320
# CHECK-ADD-ALL: =a-b+c++d
# CHECK-ADD-ALL-SAME: 0000000000000420
# CHECK-ADD-ALL: .strtab
# CHECK-ADD_ALL-SAME: 0000000000000020
# CHECK-ADD-ALL: .shstrtab
# CHECK-ADD-ALL-SAME: 0000000000000020
# CHECK-SUB-SECTION: .text1
# CHECK-SUB-SECTION-SAME: 0000000000000100
# CHECK-SUB-SECTION: .text2
# CHECK-SUB-SECTION-SAME: 0000000000000200
# CHECK-SUB-SECTION: .anotherone
# CHECK-SUB-SECTION-SAME: 00000000000002d0
# CHECK-ADD-PATTERN: .text1
# CHECK-ADD-PATTERN-SAME: 0000000000000120
# CHECK-ADD-PATTERN: .text2
# CHECK-ADD-PATTERN-SAME: 0000000000000220
# CHECK-ADD-PATTERN: .anotherone
# CHECK-ADD-PATTERN-SAME: 0000000000000300
# CHECK-SET-PATTERN: .text1
# CHECK-SET-PATTERN-SAME: 0000000000000010
# CHECK-SET-PATTERN: .text2
# CHECK-SET-PATTERN-SAME: 0000000000000010
# CHECK-SET-PATTERN: .anotherone
# CHECK-SET-PATTERN-SAME: 0000000000000300
# CHECK-MAX: .text2
# CHECK-MAX-SAME: ffffffffffffffff
# CHECK-ZERO: .text2
# CHECK-ZERO-SAME: 0000000000000000
# CHECK-INDEPENDENT: .text1
# CHECK-INDEPENDENT-SAME: 0000000000000110
# CHECK-INDEPENDENT: .text2
# CHECK-INDEPENDENT-SAME: 0000000000000210
# CHECK-USE-LAST: .anotherone
# CHECK-USE-LAST-SAME: 0000000000000320
# CHECK-NOTSUPERSET-SET: .text1
# CHECK-NOTSUPERSET-SET-SAME: 0000000000000120
# CHECK-NOTSUPERSET-SET: .text2
# CHECK-NOTSUPERSET-SET-SAME: 0000000000000220
# CHECK-NOTSUPERSET-SET: .anotherone
# CHECK-NOTSUPERSET-SET-SAME: 0000000000000320
# CHECK-SUPERSET-SET: .text1
# CHECK-SUPERSET-SET-SAME: 0000000000000120
# CHECK-SUPERSET-SET: .text2
# CHECK-SUPERSET-SET-SAME: 0000000000000220
# CHECK-SUPERSET-SET: .anotherone
# CHECK-SUPERSET-SET-SAME: 0000000000000455
# CHECK-PARTIAL-OVERLAP: .text1
# CHECK-PARTIAL-OVERLAP-SAME: 0000000000000130
# CHECK-PARTIAL-OVERLAP: .text2
# CHECK-PARTIAL-OVERLAP-SAME: 0000000000000230
# CHECK-PARTIAL-OVERLAP: .anotherone
# CHECK-PARTIAL-OVERLAP-SAME: 0000000000000320
## Check overflow by 1.
# RUN: not llvm-objcopy --change-section-address .anotherone+0xfffffffffffffd00 %ti1 2>&1 | FileCheck %s --check-prefix=ERR-OVERFLOW
## Check underflow by 1.
# RUN: not llvm-objcopy --change-section-address .text2-0x201 %ti1 2>&1 | FileCheck %s --check-prefix=ERR-UNDERFLOW
## Check error when argument value is invalid as a whole.
# RUN: not llvm-objcopy --change-section-address 0 %ti1 2>&1 | FileCheck %s --check-prefix=ERR-IVALID-VAL
## Check error when the value is invalid in the argument value.
# RUN: not llvm-objcopy --change-section-address .anotherone+0c50 %ti1 2>&1 | FileCheck %s --check-prefix=ERR-NOT-INTEGER
## Check error when the value does not fit in uint64_t.
# RUN not llvm-objcopy --change-section-address .text1=0x10000000000000000 %ti1 %to 2>&1 | FileCheck %s --chack-prefix=ERR-NOT-INTEGER
## Check error when the section pattern is missing.
# RUN: not llvm-objcopy --change-section-address =0x10 %ti1 2>&1 | FileCheck %s --check-prefix=ERR-MISSING-SECTION
## Check error when the negative adjustment value is missing.
# RUN: not llvm-objcopy --change-section-address .text1- %ti1 2>&1 | FileCheck %s --check-prefix=ERR-MISSING-VALUE-MINUS
## Check error when the positive adjustment value is missing.
# RUN: not llvm-objcopy --change-section-address .text1+ %ti1 2>&1 | FileCheck %s --check-prefix=ERR-MISSING-VALUE-PLUS
## Check error when the value to set the address to is missing.
# RUN: not llvm-objcopy --change-section-address .text1= %ti1 2>&1 | FileCheck %s --check-prefix=ERR-MISSING-VALUE-EQUAL
## Check error when the provided regex is invalid.
# RUN: not llvm-objcopy --regex --change-section-address "ab**-0x20" %ti1 2>&1 | FileCheck %s --check-prefix=ERR-MATCHER-FAILURE
# ERR-OVERFLOW: address 0x300 cannot be increased by 0xfffffffffffffd00. The result would overflow
# ERR-UNDERFLOW: address 0x200 cannot be decreased by 0x201. The result would underflow
# ERR-IVALID-VAL: error: bad format for --change-section-address: argument value 0 is invalid. See --help
# ERR-NOT-INTEGER: error: bad format for --change-section-address: value after + is 0c50 when it should be a 64-bit integer
# ERR-MISSING-SECTION: error: bad format for --change-section-address: missing section pattern to apply address change to
# ERR-MISSING-VALUE-MINUS: error: bad format for --change-section-address: missing value of offset after '-'
# ERR-MISSING-VALUE-PLUS: error: bad format for --change-section-address: missing value of offset after '+'
# ERR-MISSING-VALUE-EQUAL: error: bad format for --change-section-address: missing address value after '='
# ERR-MATCHER-FAILURE: error: cannot compile regular expression 'ab**': repetition-operator operand invalid
--- !ELF
FileHeader:
Class: ELFCLASS64
Data: ELFDATA2LSB
Type: ET_[[TYPE]]
Sections:
- Name: .text1
Type: SHT_PROGBITS
Size: 0x100
Address: 0x100
- Name: .text2
Type: SHT_PROGBITS
Size: 0x100
Address: 0x200
- Name: .anotherone
Type: SHT_PROGBITS
Size: 0x100
Address: 0x300
- Name: =a-b+c++d
Type: SHT_PROGBITS
Size: 0x100
Address: 0x400
# RUN: yaml2obj -DTYPE=EXEC %s -o %ti2
## Input file is not ET_REL
# RUN: not llvm-objcopy --change-section-address *+0x20 %ti2 2>&1 | FileCheck %s --check-prefix=ERR-FILE-TYPE
# ERR-FILE-TYPE: cannot change section address in a non-relocatable file
Codebase Browser
llvm