# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=znver3 -timeline -register-file-stats -iterations=1000 < %s | FileCheck %s
# LLVM-MCA-BEGIN
xorl %eax, %eax
addl %eax, %eax
# LLVM-MCA-END
# LLVM-MCA-BEGIN
xorq %rax, %rax
addq %rax, %rax
# LLVM-MCA-END
# LLVM-MCA-BEGIN
subl %eax, %eax
addl %eax, %eax
# LLVM-MCA-END
# LLVM-MCA-BEGIN
subq %rax, %rax
addq %rax, %rax
# LLVM-MCA-END
# CHECK: [0] Code Region
# CHECK: Iterations: 1000
# CHECK-NEXT: Instructions: 2000
# CHECK-NEXT: Total Cycles: 337
# CHECK-NEXT: Total uOps: 2000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 5.93
# CHECK-NEXT: IPC: 5.93
# CHECK-NEXT: Block RThroughput: 0.3
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 0 0.17 xorl %eax, %eax
# CHECK-NEXT: 1 1 0.25 addl %eax, %eax
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 2000
# CHECK-NEXT: Max number of mappings used: 18
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 2000
# CHECK-NEXT: Max number of mappings used: 18
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - 0.25 0.25 0.25 0.25 - - - - - - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - - - - - - - - - - - - - - - xorl %eax, %eax
# CHECK-NEXT: - - - 0.25 0.25 0.25 0.25 - - - - - - - - - - - - - - - - addl %eax, %eax
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456
# CHECK: [0,0] DR .. xorl %eax, %eax
# CHECK-NEXT: [0,1] DeER .. addl %eax, %eax
# CHECK-NEXT: [1,0] D--R .. xorl %eax, %eax
# CHECK-NEXT: [1,1] DeER .. addl %eax, %eax
# CHECK-NEXT: [2,0] D--R .. xorl %eax, %eax
# CHECK-NEXT: [2,1] DeER .. addl %eax, %eax
# CHECK-NEXT: [3,0] .D-R .. xorl %eax, %eax
# CHECK-NEXT: [3,1] .DeER.. addl %eax, %eax
# CHECK-NEXT: [4,0] .D--R.. xorl %eax, %eax
# CHECK-NEXT: [4,1] .DeER.. addl %eax, %eax
# CHECK-NEXT: [5,0] .D--R.. xorl %eax, %eax
# CHECK-NEXT: [5,1] .DeER.. addl %eax, %eax
# CHECK-NEXT: [6,0] . D-R.. xorl %eax, %eax
# CHECK-NEXT: [6,1] . DeER. addl %eax, %eax
# CHECK-NEXT: [7,0] . D--R. xorl %eax, %eax
# CHECK-NEXT: [7,1] . DeER. addl %eax, %eax
# CHECK-NEXT: [8,0] . D--R. xorl %eax, %eax
# CHECK-NEXT: [8,1] . DeER. addl %eax, %eax
# CHECK-NEXT: [9,0] . D-R. xorl %eax, %eax
# CHECK-NEXT: [9,1] . DeER addl %eax, %eax
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 10 0.0 0.0 1.5 xorl %eax, %eax
# CHECK-NEXT: 1. 10 1.0 1.0 0.0 addl %eax, %eax
# CHECK-NEXT: 10 0.5 0.5 0.8 <total>
# CHECK: [1] Code Region
# CHECK: Iterations: 1000
# CHECK-NEXT: Instructions: 2000
# CHECK-NEXT: Total Cycles: 337
# CHECK-NEXT: Total uOps: 2000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 5.93
# CHECK-NEXT: IPC: 5.93
# CHECK-NEXT: Block RThroughput: 0.3
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 0 0.17 xorq %rax, %rax
# CHECK-NEXT: 1 1 0.25 addq %rax, %rax
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 2000
# CHECK-NEXT: Max number of mappings used: 18
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 2000
# CHECK-NEXT: Max number of mappings used: 18
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - 0.25 0.25 0.25 0.25 - - - - - - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - - - - - - - - - - - - - - - xorq %rax, %rax
# CHECK-NEXT: - - - 0.25 0.25 0.25 0.25 - - - - - - - - - - - - - - - - addq %rax, %rax
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456
# CHECK: [0,0] DR .. xorq %rax, %rax
# CHECK-NEXT: [0,1] DeER .. addq %rax, %rax
# CHECK-NEXT: [1,0] D--R .. xorq %rax, %rax
# CHECK-NEXT: [1,1] DeER .. addq %rax, %rax
# CHECK-NEXT: [2,0] D--R .. xorq %rax, %rax
# CHECK-NEXT: [2,1] DeER .. addq %rax, %rax
# CHECK-NEXT: [3,0] .D-R .. xorq %rax, %rax
# CHECK-NEXT: [3,1] .DeER.. addq %rax, %rax
# CHECK-NEXT: [4,0] .D--R.. xorq %rax, %rax
# CHECK-NEXT: [4,1] .DeER.. addq %rax, %rax
# CHECK-NEXT: [5,0] .D--R.. xorq %rax, %rax
# CHECK-NEXT: [5,1] .DeER.. addq %rax, %rax
# CHECK-NEXT: [6,0] . D-R.. xorq %rax, %rax
# CHECK-NEXT: [6,1] . DeER. addq %rax, %rax
# CHECK-NEXT: [7,0] . D--R. xorq %rax, %rax
# CHECK-NEXT: [7,1] . DeER. addq %rax, %rax
# CHECK-NEXT: [8,0] . D--R. xorq %rax, %rax
# CHECK-NEXT: [8,1] . DeER. addq %rax, %rax
# CHECK-NEXT: [9,0] . D-R. xorq %rax, %rax
# CHECK-NEXT: [9,1] . DeER addq %rax, %rax
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 10 0.0 0.0 1.5 xorq %rax, %rax
# CHECK-NEXT: 1. 10 1.0 1.0 0.0 addq %rax, %rax
# CHECK-NEXT: 10 0.5 0.5 0.8 <total>
# CHECK: [2] Code Region
# CHECK: Iterations: 1000
# CHECK-NEXT: Instructions: 2000
# CHECK-NEXT: Total Cycles: 337
# CHECK-NEXT: Total uOps: 2000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 5.93
# CHECK-NEXT: IPC: 5.93
# CHECK-NEXT: Block RThroughput: 0.3
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 0 0.17 subl %eax, %eax
# CHECK-NEXT: 1 1 0.25 addl %eax, %eax
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 2000
# CHECK-NEXT: Max number of mappings used: 18
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 2000
# CHECK-NEXT: Max number of mappings used: 18
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - 0.25 0.25 0.25 0.25 - - - - - - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - - - - - - - - - - - - - - - subl %eax, %eax
# CHECK-NEXT: - - - 0.25 0.25 0.25 0.25 - - - - - - - - - - - - - - - - addl %eax, %eax
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456
# CHECK: [0,0] DR .. subl %eax, %eax
# CHECK-NEXT: [0,1] DeER .. addl %eax, %eax
# CHECK-NEXT: [1,0] D--R .. subl %eax, %eax
# CHECK-NEXT: [1,1] DeER .. addl %eax, %eax
# CHECK-NEXT: [2,0] D--R .. subl %eax, %eax
# CHECK-NEXT: [2,1] DeER .. addl %eax, %eax
# CHECK-NEXT: [3,0] .D-R .. subl %eax, %eax
# CHECK-NEXT: [3,1] .DeER.. addl %eax, %eax
# CHECK-NEXT: [4,0] .D--R.. subl %eax, %eax
# CHECK-NEXT: [4,1] .DeER.. addl %eax, %eax
# CHECK-NEXT: [5,0] .D--R.. subl %eax, %eax
# CHECK-NEXT: [5,1] .DeER.. addl %eax, %eax
# CHECK-NEXT: [6,0] . D-R.. subl %eax, %eax
# CHECK-NEXT: [6,1] . DeER. addl %eax, %eax
# CHECK-NEXT: [7,0] . D--R. subl %eax, %eax
# CHECK-NEXT: [7,1] . DeER. addl %eax, %eax
# CHECK-NEXT: [8,0] . D--R. subl %eax, %eax
# CHECK-NEXT: [8,1] . DeER. addl %eax, %eax
# CHECK-NEXT: [9,0] . D-R. subl %eax, %eax
# CHECK-NEXT: [9,1] . DeER addl %eax, %eax
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 10 0.0 0.0 1.5 subl %eax, %eax
# CHECK-NEXT: 1. 10 1.0 1.0 0.0 addl %eax, %eax
# CHECK-NEXT: 10 0.5 0.5 0.8 <total>
# CHECK: [3] Code Region
# CHECK: Iterations: 1000
# CHECK-NEXT: Instructions: 2000
# CHECK-NEXT: Total Cycles: 337
# CHECK-NEXT: Total uOps: 2000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 5.93
# CHECK-NEXT: IPC: 5.93
# CHECK-NEXT: Block RThroughput: 0.3
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 0 0.17 subq %rax, %rax
# CHECK-NEXT: 1 1 0.25 addq %rax, %rax
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 2000
# CHECK-NEXT: Max number of mappings used: 18
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 2000
# CHECK-NEXT: Max number of mappings used: 18
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - 0.25 0.25 0.25 0.25 - - - - - - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - - - - - - - - - - - - - - - subq %rax, %rax
# CHECK-NEXT: - - - 0.25 0.25 0.25 0.25 - - - - - - - - - - - - - - - - addq %rax, %rax
# CHECK: Timeline view:
# CHECK-NEXT: Index 0123456
# CHECK: [0,0] DR .. subq %rax, %rax
# CHECK-NEXT: [0,1] DeER .. addq %rax, %rax
# CHECK-NEXT: [1,0] D--R .. subq %rax, %rax
# CHECK-NEXT: [1,1] DeER .. addq %rax, %rax
# CHECK-NEXT: [2,0] D--R .. subq %rax, %rax
# CHECK-NEXT: [2,1] DeER .. addq %rax, %rax
# CHECK-NEXT: [3,0] .D-R .. subq %rax, %rax
# CHECK-NEXT: [3,1] .DeER.. addq %rax, %rax
# CHECK-NEXT: [4,0] .D--R.. subq %rax, %rax
# CHECK-NEXT: [4,1] .DeER.. addq %rax, %rax
# CHECK-NEXT: [5,0] .D--R.. subq %rax, %rax
# CHECK-NEXT: [5,1] .DeER.. addq %rax, %rax
# CHECK-NEXT: [6,0] . D-R.. subq %rax, %rax
# CHECK-NEXT: [6,1] . DeER. addq %rax, %rax
# CHECK-NEXT: [7,0] . D--R. subq %rax, %rax
# CHECK-NEXT: [7,1] . DeER. addq %rax, %rax
# CHECK-NEXT: [8,0] . D--R. subq %rax, %rax
# CHECK-NEXT: [8,1] . DeER. addq %rax, %rax
# CHECK-NEXT: [9,0] . D-R. subq %rax, %rax
# CHECK-NEXT: [9,1] . DeER addq %rax, %rax
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 10 0.0 0.0 1.5 subq %rax, %rax
# CHECK-NEXT: 1. 10 1.0 1.0 0.0 addq %rax, %rax
# CHECK-NEXT: 10 0.5 0.5 0.8 <total>
Codebase Browser
llvm