# NOTE: Assertions have been autogenerated by utils/update_mca_test_checks.py
# RUN: llvm-mca -mtriple=x86_64-unknown-unknown -mcpu=znver3 -timeline -timeline-max-iterations=2 -register-file-stats -iterations=10000 < %s | FileCheck %s
# LLVM-MCA-BEGIN
xorps %xmm1, %xmm1
xorps %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
xorpd %xmm1, %xmm1
xorpd %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
andnps %xmm1, %xmm1
andnps %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
andnpd %xmm1, %xmm1
andnpd %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
pxor %xmm1, %xmm1
pxor %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
pandn %xmm1, %xmm1
pandn %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
psubb %xmm1, %xmm1
psubb %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
psubw %xmm1, %xmm1
psubw %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
psubd %xmm1, %xmm1
psubd %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
psubq %xmm1, %xmm1
psubq %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
psubsb %xmm1, %xmm1
pxor %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
psubsw %xmm1, %xmm1
pxor %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
psubusb %xmm1, %xmm1
pxor %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
psubusw %xmm1, %xmm1
pxor %xmm0, %xmm1
# LLVM-MCA-END
# LLVM-MCA-BEGIN
pcmpgtb %xmm0, %xmm0
paddb %xmm0, %xmm0
# LLVM-MCA-END
# LLVM-MCA-BEGIN
pcmpgtw %xmm0, %xmm0
paddw %xmm0, %xmm0
# LLVM-MCA-END
# LLVM-MCA-BEGIN
pcmpgtd %xmm0, %xmm0
paddd %xmm0, %xmm0
# LLVM-MCA-END
# LLVM-MCA-BEGIN
pcmpgtq %xmm0, %xmm0
paddq %xmm0, %xmm0
# LLVM-MCA-END
# CHECK: [0] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 xorps %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 xorps %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - xorps %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - xorps %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. xorps %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER xorps %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R xorps %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER xorps %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 xorps %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 xorps %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [1] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 xorpd %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 xorpd %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - xorpd %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - xorpd %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. xorpd %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER xorpd %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R xorpd %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER xorpd %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 xorpd %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 xorpd %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [2] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 andnps %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 andnps %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - andnps %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - andnps %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. andnps %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER andnps %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R andnps %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER andnps %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 andnps %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 andnps %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [3] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 andnpd %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 andnpd %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - andnpd %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - andnpd %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. andnpd %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER andnpd %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R andnpd %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER andnpd %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 andnpd %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 andnpd %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [4] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 pxor %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - pxor %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - pxor %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. pxor %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R pxor %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 pxor %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [5] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 pandn %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 pandn %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - pandn %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - pandn %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. pandn %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER pandn %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R pandn %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER pandn %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 pandn %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 pandn %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [6] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 psubb %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 psubb %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - psubb %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - psubb %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. psubb %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER psubb %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R psubb %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER psubb %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubb %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 psubb %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [7] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 psubw %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 psubw %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - psubw %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - psubw %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. psubw %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER psubw %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R psubw %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER psubw %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubw %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 psubw %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [8] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 psubd %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 psubd %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - psubd %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - psubd %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. psubd %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER psubd %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R psubd %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER psubd %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubd %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 psubd %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [9] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 psubq %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 psubq %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - - 0.50 0.25 0.25 - - - - - - - - - - - psubq %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - 0.50 - 0.25 0.25 - - - - - - - - - - - psubq %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. psubq %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER psubq %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R psubq %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER psubq %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubq %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 psubq %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [10] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.50 psubsb %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - 0.50 0.50 - - - - - - - - - - - - - psubsb %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - - - 0.50 0.50 - - - - - - - - - - - pxor %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. psubsb %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R psubsb %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubsb %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [11] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.50 psubsw %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - 0.50 0.50 - - - - - - - - - - - - - psubsw %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - - - 0.50 0.50 - - - - - - - - - - - pxor %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. psubsw %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R psubsw %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubsw %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [12] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.50 psubusb %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - 0.50 0.50 - - - - - - - - - - - - - psubusb %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - - - 0.50 0.50 - - - - - - - - - - - pxor %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. psubusb %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R psubusb %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubusb %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [13] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.50 psubusw %xmm1, %xmm1
# CHECK-NEXT: 1 1 0.25 pxor %xmm0, %xmm1
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - 0.50 0.50 - - - - - - - - - - - - - psubusw %xmm1, %xmm1
# CHECK-NEXT: - - - - - - - - - - 0.50 0.50 - - - - - - - - - - - pxor %xmm0, %xmm1
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. psubusw %xmm1, %xmm1
# CHECK-NEXT: [0,1] D=eER pxor %xmm0, %xmm1
# CHECK-NEXT: [1,0] DeE-R psubusw %xmm1, %xmm1
# CHECK-NEXT: [1,1] D=eER pxor %xmm0, %xmm1
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 psubusw %xmm1, %xmm1
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 pxor %xmm0, %xmm1
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [14] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 pcmpgtb %xmm0, %xmm0
# CHECK-NEXT: 1 1 0.25 paddb %xmm0, %xmm0
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - 0.25 0.25 0.50 - - - - - - - - - - - - pcmpgtb %xmm0, %xmm0
# CHECK-NEXT: - - - - - - - - 0.25 0.25 - 0.50 - - - - - - - - - - - paddb %xmm0, %xmm0
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. pcmpgtb %xmm0, %xmm0
# CHECK-NEXT: [0,1] D=eER paddb %xmm0, %xmm0
# CHECK-NEXT: [1,0] DeE-R pcmpgtb %xmm0, %xmm0
# CHECK-NEXT: [1,1] D=eER paddb %xmm0, %xmm0
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 pcmpgtb %xmm0, %xmm0
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 paddb %xmm0, %xmm0
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [15] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 pcmpgtw %xmm0, %xmm0
# CHECK-NEXT: 1 1 0.25 paddw %xmm0, %xmm0
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - 0.25 0.25 0.50 - - - - - - - - - - - - pcmpgtw %xmm0, %xmm0
# CHECK-NEXT: - - - - - - - - 0.25 0.25 - 0.50 - - - - - - - - - - - paddw %xmm0, %xmm0
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. pcmpgtw %xmm0, %xmm0
# CHECK-NEXT: [0,1] D=eER paddw %xmm0, %xmm0
# CHECK-NEXT: [1,0] DeE-R pcmpgtw %xmm0, %xmm0
# CHECK-NEXT: [1,1] D=eER paddw %xmm0, %xmm0
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 pcmpgtw %xmm0, %xmm0
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 paddw %xmm0, %xmm0
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [16] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 pcmpgtd %xmm0, %xmm0
# CHECK-NEXT: 1 1 0.25 paddd %xmm0, %xmm0
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - 0.25 0.25 0.50 - - - - - - - - - - - - pcmpgtd %xmm0, %xmm0
# CHECK-NEXT: - - - - - - - - 0.25 0.25 - 0.50 - - - - - - - - - - - paddd %xmm0, %xmm0
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. pcmpgtd %xmm0, %xmm0
# CHECK-NEXT: [0,1] D=eER paddd %xmm0, %xmm0
# CHECK-NEXT: [1,0] DeE-R pcmpgtd %xmm0, %xmm0
# CHECK-NEXT: [1,1] D=eER paddd %xmm0, %xmm0
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 pcmpgtd %xmm0, %xmm0
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 paddd %xmm0, %xmm0
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>
# CHECK: [17] Code Region
# CHECK: Iterations: 10000
# CHECK-NEXT: Instructions: 20000
# CHECK-NEXT: Total Cycles: 5004
# CHECK-NEXT: Total uOps: 20000
# CHECK: Dispatch Width: 6
# CHECK-NEXT: uOps Per Cycle: 4.00
# CHECK-NEXT: IPC: 4.00
# CHECK-NEXT: Block RThroughput: 0.5
# CHECK: Instruction Info:
# CHECK-NEXT: [1]: #uOps
# CHECK-NEXT: [2]: Latency
# CHECK-NEXT: [3]: RThroughput
# CHECK-NEXT: [4]: MayLoad
# CHECK-NEXT: [5]: MayStore
# CHECK-NEXT: [6]: HasSideEffects (U)
# CHECK: [1] [2] [3] [4] [5] [6] Instructions:
# CHECK-NEXT: 1 1 0.25 pcmpgtq %xmm0, %xmm0
# CHECK-NEXT: 1 1 0.25 paddq %xmm0, %xmm0
# CHECK: Register File statistics:
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #1 -- Zn3FpPRF:
# CHECK-NEXT: Number of physical registers: 160
# CHECK-NEXT: Total number of mappings created: 10000
# CHECK-NEXT: Max number of mappings used: 37
# CHECK: * Register File #2 -- Zn3IntegerPRF:
# CHECK-NEXT: Number of physical registers: 192
# CHECK-NEXT: Total number of mappings created: 0
# CHECK-NEXT: Max number of mappings used: 0
# CHECK: Resources:
# CHECK-NEXT: [0] - Zn3AGU0
# CHECK-NEXT: [1] - Zn3AGU1
# CHECK-NEXT: [2] - Zn3AGU2
# CHECK-NEXT: [3] - Zn3ALU0
# CHECK-NEXT: [4] - Zn3ALU1
# CHECK-NEXT: [5] - Zn3ALU2
# CHECK-NEXT: [6] - Zn3ALU3
# CHECK-NEXT: [7] - Zn3BRU1
# CHECK-NEXT: [8] - Zn3FP0
# CHECK-NEXT: [9] - Zn3FP1
# CHECK-NEXT: [10] - Zn3FP2
# CHECK-NEXT: [11] - Zn3FP3
# CHECK-NEXT: [12.0] - Zn3FP45
# CHECK-NEXT: [12.1] - Zn3FP45
# CHECK-NEXT: [13] - Zn3FPSt
# CHECK-NEXT: [14.0] - Zn3LSU
# CHECK-NEXT: [14.1] - Zn3LSU
# CHECK-NEXT: [14.2] - Zn3LSU
# CHECK-NEXT: [15.0] - Zn3Load
# CHECK-NEXT: [15.1] - Zn3Load
# CHECK-NEXT: [15.2] - Zn3Load
# CHECK-NEXT: [16.0] - Zn3Store
# CHECK-NEXT: [16.1] - Zn3Store
# CHECK: Resource pressure per iteration:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1]
# CHECK-NEXT: - - - - - - - - 0.50 0.50 0.50 0.50 - - - - - - - - - - -
# CHECK: Resource pressure by instruction:
# CHECK-NEXT: [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12.0] [12.1] [13] [14.0] [14.1] [14.2] [15.0] [15.1] [15.2] [16.0] [16.1] Instructions:
# CHECK-NEXT: - - - - - - - - 0.25 0.25 0.50 - - - - - - - - - - - - pcmpgtq %xmm0, %xmm0
# CHECK-NEXT: - - - - - - - - 0.25 0.25 - 0.50 - - - - - - - - - - - paddq %xmm0, %xmm0
# CHECK: Timeline view:
# CHECK-NEXT: Index 01234
# CHECK: [0,0] DeER. pcmpgtq %xmm0, %xmm0
# CHECK-NEXT: [0,1] D=eER paddq %xmm0, %xmm0
# CHECK-NEXT: [1,0] DeE-R pcmpgtq %xmm0, %xmm0
# CHECK-NEXT: [1,1] D=eER paddq %xmm0, %xmm0
# CHECK: Average Wait times (based on the timeline view):
# CHECK-NEXT: [0]: Executions
# CHECK-NEXT: [1]: Average time spent waiting in a scheduler's queue
# CHECK-NEXT: [2]: Average time spent waiting in a scheduler's queue while ready
# CHECK-NEXT: [3]: Average time elapsed from WB until retire stage
# CHECK: [0] [1] [2] [3]
# CHECK-NEXT: 0. 2 1.0 1.0 0.5 pcmpgtq %xmm0, %xmm0
# CHECK-NEXT: 1. 2 2.0 0.0 0.0 paddq %xmm0, %xmm0
# CHECK-NEXT: 2 1.5 0.5 0.3 <total>