#!/bin/sh
test_description='git p4 client view'
TEST_PASSES_SANITIZE_LEAK=true
. ./lib-git-p4.sh
test_expect_success 'start p4d' '
start_p4d
'
#
# Verify these files exist, exactly. Caller creates
# a list of files in file "files".
#
check_files_exist() {
ok=0 &&
num=$# &&
for arg ; do
test_path_is_file "$arg" &&
ok=$(($ok + 1))
done &&
test $ok -eq $num &&
test_line_count = $num files
}
#
# Sync up the p4 client, make sure the given files (and only
# those) exist.
#
client_verify() {
(
cd "$cli" &&
p4 sync &&
find . -type f ! -name files >files &&
check_files_exist "$@"
)
}
#
# Make sure the named files, exactly, exist.
#
git_verify() {
(
cd "$git" &&
git ls-files >files &&
check_files_exist "$@"
)
}
# //depot
# - dir1
# - file11
# - file12
# - dir2
# - file21
# - file22
init_depot() {
for d in 1 2 ; do
mkdir -p dir$d &&
for f in 1 2 ; do
echo dir$d/file$d$f >dir$d/file$d$f &&
p4 add dir$d/file$d$f &&
p4 submit -d "dir$d/file$d$f"
done
done &&
find . -type f ! -name files >files &&
check_files_exist dir1/file11 dir1/file12 \
dir2/file21 dir2/file22
}
test_expect_success 'init depot' '
(
cd "$cli" &&
init_depot
)
'
# double % for printf
test_expect_success 'view wildcard %%n' '
client_view "//depot/%%%%1/sub/... //client/sub/%%%%1/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'view wildcard *' '
client_view "//depot/*/bar/... //client/*/bar/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'wildcard ... in the middle' '
client_view "//depot/.../file11 //client/.../file11" &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'wildcard ... in the middle and at the end' '
client_view "//depot/.../a/... //client/.../a/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot
'
test_expect_success 'basic map' '
client_view "//depot/dir1/... //client/cli1/..." &&
files="cli1/file11 cli1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'client view with no mappings' '
client_view &&
client_verify &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify
'
test_expect_success 'single file map' '
client_view "//depot/dir1/file11 //client/file11" &&
files="file11" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'later mapping takes precedence (entire repo)' '
client_view "//depot/dir1/... //client/cli1/..." \
"//depot/... //client/cli2/..." &&
files="cli2/dir1/file11 cli2/dir1/file12
cli2/dir2/file21 cli2/dir2/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'later mapping takes precedence (partial repo)' '
client_view "//depot/dir1/... //client/..." \
"//depot/dir2/... //client/..." &&
files="file21 file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
# Reading the view backwards,
# dir2 goes to cli12
# dir1 cannot go to cli12 since it was filled by dir2
# dir1 also does not go to cli3, since the second rule
# noticed that it matched, but was already filled
test_expect_success 'depot path matching rejected client path' '
client_view "//depot/dir1/... //client/cli3/..." \
"//depot/dir1/... //client/cli12/..." \
"//depot/dir2/... //client/cli12/..." &&
files="cli12/file21 cli12/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
# since both have the same //client/..., the exclusion
# rule keeps everything out
test_expect_success 'exclusion wildcard, client rhs same (odd)' '
client_view "//depot/... //client/..." \
"-//depot/dir2/... //client/..." &&
client_verify &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify
'
test_expect_success 'exclusion wildcard, client rhs different (normal)' '
client_view "//depot/... //client/..." \
"-//depot/dir2/... //client/dir2/..." &&
files="dir1/file11 dir1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'exclusion single file' '
client_view "//depot/... //client/..." \
"-//depot/dir2/file22 //client/file22" &&
files="dir1/file11 dir1/file12 dir2/file21" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'overlay wildcard' '
client_view "//depot/dir1/... //client/cli/..." \
"+//depot/dir2/... //client/cli/..." &&
files="cli/file11 cli/file12 cli/file21 cli/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'overlay single file' '
client_view "//depot/dir1/... //client/cli/..." \
"+//depot/dir2/file21 //client/cli/file21" &&
files="cli/file11 cli/file12 cli/file21" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'exclusion with later inclusion' '
client_view "//depot/... //client/..." \
"-//depot/dir2/... //client/dir2/..." \
"//depot/dir2/... //client/dir2incl/..." &&
files="dir1/file11 dir1/file12 dir2incl/file21 dir2incl/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'quotes on rhs only' '
client_view "//depot/dir1/... \"//client/cdir 1/...\"" &&
client_verify "cdir 1/file11" "cdir 1/file12" &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify "cdir 1/file11" "cdir 1/file12"
'
#
# Submit tests
#
# clone sets variable
test_expect_success 'clone --use-client-spec sets useClientSpec' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
(
cd "$git" &&
git config --bool git-p4.useClientSpec >actual &&
echo true >true &&
test_cmp actual true
)
'
# clone just a subdir of the client spec
test_expect_success 'subdir clone' '
client_view "//depot/... //client/..." &&
files="dir1/file11 dir1/file12 dir2/file21 dir2/file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
git_verify dir1/file11 dir1/file12
'
#
# submit back, see what happens: five cases
#
test_expect_success 'subdir clone, submit modify' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
echo line >>dir1/file12 &&
git add dir1/file12 &&
git commit -m dir1/file12 &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_file dir1/file12 &&
test_line_count = 2 dir1/file12
)
'
test_expect_success 'subdir clone, submit add' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
echo file13 >dir1/file13 &&
git add dir1/file13 &&
git commit -m dir1/file13 &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_file dir1/file13
)
'
test_expect_success 'subdir clone, submit delete' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git rm dir1/file12 &&
git commit -m "delete dir1/file12" &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_missing dir1/file12
)
'
test_expect_success 'subdir clone, submit copy' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git config git-p4.detectCopies true &&
cp dir1/file11 dir1/file11a &&
git add dir1/file11a &&
git commit -m "copy to dir1/file11a" &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_file dir1/file11a &&
! is_cli_file_writeable dir1/file11a
)
'
test_expect_success 'subdir clone, submit rename' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git config git-p4.detectRenames true &&
git mv dir1/file13 dir1/file13a &&
git commit -m "rename dir1/file13 to dir1/file13a" &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_missing dir1/file13 &&
test_path_is_file dir1/file13a &&
! is_cli_file_writeable dir1/file13a
)
'
# see t9800 for the non-client-spec case, and the rest of the wildcard tests
test_expect_success 'wildcard files submit back to p4, client-spec case' '
client_view "//depot/... //client/..." &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot/dir1 &&
(
cd "$git" &&
echo git-wild-hash >dir1/git-wild#hash &&
if test_have_prereq !MINGW,!CYGWIN
then
echo git-wild-star >dir1/git-wild\*star
fi &&
echo git-wild-at >dir1/git-wild@at &&
echo git-wild-percent >dir1/git-wild%percent &&
git add dir1/git-wild* &&
git commit -m "add some wildcard filenames" &&
git config git-p4.skipSubmitEditCheck true &&
git p4 submit
) &&
(
cd "$cli" &&
test_path_is_file dir1/git-wild#hash &&
if test_have_prereq !MINGW,!CYGWIN
then
test_path_is_file dir1/git-wild\*star
fi &&
test_path_is_file dir1/git-wild@at &&
test_path_is_file dir1/git-wild%percent
) &&
(
# delete these carefully, cannot just do "p4 delete"
# on files with wildcards; but git-p4 knows how
cd "$git" &&
git rm dir1/git-wild* &&
git commit -m "clean up the wildcards" &&
git p4 submit
)
'
test_expect_success 'reinit depot' '
(
cd "$cli" &&
rm files &&
p4 delete */* &&
p4 submit -d "delete all files" &&
init_depot
)
'
#
# What happens when two files of the same name are overlaid together?
# The last-listed file should take preference.
#
# //depot
# - dir1
# - file11
# - file12
# - filecollide
# - dir2
# - file21
# - file22
# - filecollide
#
test_expect_success 'overlay collision setup' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/filecollide >dir1/filecollide &&
p4 add dir1/filecollide &&
p4 submit -d dir1/filecollide &&
echo dir2/filecollide >dir2/filecollide &&
p4 add dir2/filecollide &&
p4 submit -d dir2/filecollide
)
'
test_expect_success 'overlay collision 1 to 2' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 filecollide" &&
echo dir2/filecollide >actual &&
client_verify $files &&
test_cmp actual "$cli"/filecollide &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files &&
test_cmp actual "$git"/filecollide
'
test_expect_failure 'overlay collision 2 to 1' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 filecollide" &&
echo dir1/filecollide >actual &&
client_verify $files &&
test_cmp actual "$cli"/filecollide &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files &&
test_cmp actual "$git"/filecollide
'
test_expect_success 'overlay collision delete 2' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
p4 delete dir2/filecollide &&
p4 submit -d "remove dir2/filecollide"
)
'
# no filecollide, got deleted with dir2
test_expect_failure 'overlay collision 1 to 2, but 2 deleted' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'overlay collision update 1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
p4 open dir1/filecollide &&
echo dir1/filecollide update >dir1/filecollide &&
p4 submit -d "update dir1/filecollide"
)
'
# still no filecollide, dir2 still wins with the deletion even though the
# change to dir1 is more recent
test_expect_failure 'overlay collision 1 to 2, but 2 deleted, then 1 updated' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files
'
test_expect_success 'overlay collision delete filecollides' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
p4 delete dir1/filecollide dir2/filecollide &&
p4 submit -d "remove filecollides"
)
'
#
# Overlays as part of sync, rather than initial checkout:
# 1. add a file in dir1
# 2. sync to include it
# 3. add same file in dir2
# 4. sync, make sure content switches as dir2 has priority
# 5. add another file in dir1
# 6. sync
# 7. add/delete same file in dir2
# 8. sync, make sure it disappears, again dir2 wins
# 9. cleanup
#
# //depot
# - dir1
# - file11
# - file12
# - colA
# - colB
# - dir2
# - file21
# - file22
# - colA
# - colB
#
test_expect_success 'overlay sync: add colA in dir1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/colA >dir1/colA &&
p4 add dir1/colA &&
p4 submit -d dir1/colA
)
'
test_expect_success 'overlay sync: initial git checkout' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
echo dir1/colA >actual &&
client_verify $files &&
test_cmp actual "$cli"/colA &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files &&
test_cmp actual "$git"/colA
'
test_expect_success 'overlay sync: add colA in dir2' '
client_view "//depot/dir2/... //client/dir2/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir2/colA >dir2/colA &&
p4 add dir2/colA &&
p4 submit -d dir2/colA
)
'
test_expect_success 'overlay sync: colA content switch' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
echo dir2/colA >actual &&
client_verify $files &&
test_cmp actual "$cli"/colA &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$git"/colA
'
test_expect_success 'overlay sync: add colB in dir1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/colB >dir1/colB &&
p4 add dir1/colB &&
p4 submit -d dir1/colB
)
'
test_expect_success 'overlay sync: colB appears' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 colA colB" &&
echo dir1/colB >actual &&
client_verify $files &&
test_cmp actual "$cli"/colB &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$git"/colB
'
test_expect_success 'overlay sync: add/delete colB in dir2' '
client_view "//depot/dir2/... //client/dir2/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir2/colB >dir2/colB &&
p4 add dir2/colB &&
p4 submit -d dir2/colB &&
p4 delete dir2/colB &&
p4 submit -d "delete dir2/colB"
)
'
test_expect_success 'overlay sync: colB disappears' '
client_view "//depot/dir1/... //client/..." \
"+//depot/dir2/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
client_verify $files &&
test_when_finished cleanup_git &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files
'
test_expect_success 'overlay sync: cleanup' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
p4 delete dir1/colA dir2/colA dir1/colB &&
p4 submit -d "remove overlay sync files"
)
'
#
# Overlay tests again, but swapped so dir1 has priority.
# 1. add a file in dir1
# 2. sync to include it
# 3. add same file in dir2
# 4. sync, make sure content does not switch
# 5. add another file in dir1
# 6. sync
# 7. add/delete same file in dir2
# 8. sync, make sure it is still there
# 9. cleanup
#
# //depot
# - dir1
# - file11
# - file12
# - colA
# - colB
# - dir2
# - file21
# - file22
# - colA
# - colB
#
test_expect_success 'overlay sync swap: add colA in dir1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/colA >dir1/colA &&
p4 add dir1/colA &&
p4 submit -d dir1/colA
)
'
test_expect_success 'overlay sync swap: initial git checkout' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
echo dir1/colA >actual &&
client_verify $files &&
test_cmp actual "$cli"/colA &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify $files &&
test_cmp actual "$git"/colA
'
test_expect_success 'overlay sync swap: add colA in dir2' '
client_view "//depot/dir2/... //client/dir2/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir2/colA >dir2/colA &&
p4 add dir2/colA &&
p4 submit -d dir2/colA
)
'
test_expect_failure 'overlay sync swap: colA no content switch' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 colA" &&
echo dir1/colA >actual &&
client_verify $files &&
test_cmp actual "$cli"/colA &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$git"/colA
'
test_expect_success 'overlay sync swap: add colB in dir1' '
client_view "//depot/dir1/... //client/dir1/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir1/colB >dir1/colB &&
p4 add dir1/colB &&
p4 submit -d dir1/colB
)
'
test_expect_success 'overlay sync swap: colB appears' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 colA colB" &&
echo dir1/colB >actual &&
client_verify $files &&
test_cmp actual "$cli"/colB &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$git"/colB
'
test_expect_success 'overlay sync swap: add/delete colB in dir2' '
client_view "//depot/dir2/... //client/dir2/..." &&
(
cd "$cli" &&
p4 sync &&
echo dir2/colB >dir2/colB &&
p4 add dir2/colB &&
p4 submit -d dir2/colB &&
p4 delete dir2/colB &&
p4 submit -d "delete dir2/colB"
)
'
test_expect_failure 'overlay sync swap: colB no change' '
client_view "//depot/dir2/... //client/..." \
"+//depot/dir1/... //client/..." &&
files="file11 file12 file21 file22 colA colB" &&
echo dir1/colB >actual &&
client_verify $files &&
test_cmp actual "$cli"/colB &&
test_when_finished cleanup_git &&
(
cd "$git" &&
git p4 sync --use-client-spec &&
git merge --ff-only p4/master
) &&
git_verify $files &&
test_cmp actual "$cli"/colB
'
test_expect_success 'overlay sync swap: cleanup' '
client_view "//depot/... //client/..." &&
(
cd "$cli" &&
p4 sync &&
p4 delete dir1/colA dir2/colA dir1/colB &&
p4 submit -d "remove overlay sync files"
)
'
#
# Rename directories to test quoting in depot-side mappings
# //depot
# - "dir 1"
# - file11
# - file12
# - "dir 2"
# - file21
# - file22
#
test_expect_success 'rename files to introduce spaces' '
client_view "//depot/... //client/..." &&
client_verify dir1/file11 dir1/file12 \
dir2/file21 dir2/file22 &&
(
cd "$cli" &&
p4 open dir1/... &&
p4 move dir1/... "dir 1"/... &&
p4 open dir2/... &&
p4 move dir2/... "dir 2"/... &&
p4 submit -d "rename with spaces"
) &&
client_verify "dir 1/file11" "dir 1/file12" \
"dir 2/file21" "dir 2/file22"
'
test_expect_success 'quotes on lhs only' '
client_view "\"//depot/dir 1/...\" //client/cdir1/..." &&
files="cdir1/file11 cdir1/file12" &&
client_verify $files &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
client_verify $files
'
test_expect_success 'quotes on both sides' '
client_view "\"//depot/dir 1/...\" \"//client/cdir 1/...\"" &&
client_verify "cdir 1/file11" "cdir 1/file12" &&
test_when_finished cleanup_git &&
git p4 clone --use-client-spec --dest="$git" //depot &&
git_verify "cdir 1/file11" "cdir 1/file12"
'
test_done
Codebase Browser
git