git-send-email(1)
=================
NAME
----
git-send-email - Send a collection of patches as emails
SYNOPSIS
--------
[verse]
'git send-email' [<options>] (<file>|<directory>)...
'git send-email' [<options>] <format-patch-options>
'git send-email' --dump-aliases
'git send-email' --translate-aliases
DESCRIPTION
-----------
Takes the patches given on the command line and emails them out.
Patches can be specified as files, directories (which will send all
files in the directory), or directly as a revision list. In the
last case, any format accepted by linkgit:git-format-patch[1] can
be passed to git send-email, as well as options understood by
linkgit:git-format-patch[1].
The header of the email is configurable via command-line options. If not
specified on the command line, the user will be prompted with a ReadLine
enabled interface to provide the necessary information.
There are two formats accepted for patch files:
1. mbox format files
+
This is what linkgit:git-format-patch[1] generates. Most headers and MIME
formatting are ignored.
2. The original format used by Greg Kroah-Hartman's 'send_lots_of_email.pl'
script
+
This format expects the first line of the file to contain the "Cc:" value
and the "Subject:" of the message as the second line.
OPTIONS
-------
Composing
~~~~~~~~~
--annotate::
Review and edit each patch you're about to send. Default is the value
of `sendemail.annotate`. See the CONFIGURATION section for
`sendemail.multiEdit`.
--bcc=<address>,...::
Specify a "Bcc:" value for each email. Default is the value of
`sendemail.bcc`.
+
This option may be specified multiple times.
--cc=<address>,...::
Specify a starting "Cc:" value for each email.
Default is the value of `sendemail.cc`.
+
This option may be specified multiple times.
--compose::
Invoke a text editor (see GIT_EDITOR in linkgit:git-var[1])
to edit an introductory message for the patch series.
+
When `--compose` is used, git send-email will use the From, To, Cc, Bcc,
Subject, Reply-To, and In-Reply-To headers specified in the message. If
the body of the message (what you type after the headers and a blank
line) only contains blank (or Git: prefixed) lines, the summary won't be
sent, but the headers mentioned above will be used unless they are
removed.
+
Missing From or In-Reply-To headers will be prompted for.
+
See the CONFIGURATION section for `sendemail.multiEdit`.
--from=<address>::
Specify the sender of the emails. If not specified on the command line,
the value of the `sendemail.from` configuration option is used. If
neither the command-line option nor `sendemail.from` are set, then the
user will be prompted for the value. The default for the prompt will be
the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not
set, as returned by "git var -l".
--reply-to=<address>::
Specify the address where replies from recipients should go to.
Use this if replies to messages should go to another address than what
is specified with the --from parameter.
--in-reply-to=<identifier>::
Make the first mail (or all the mails with `--no-thread`) appear as a
reply to the given Message-ID, which avoids breaking threads to
provide a new patch series.
The second and subsequent emails will be sent as replies according to
the `--[no-]chain-reply-to` setting.
+
So for example when `--thread` and `--no-chain-reply-to` are specified, the
second and subsequent patches will be replies to the first one like in the
illustration below where `[PATCH v2 0/3]` is in reply to `[PATCH 0/2]`:
+
[PATCH 0/2] Here is what I did...
[PATCH 1/2] Clean up and tests
[PATCH 2/2] Implementation
[PATCH v2 0/3] Here is a reroll
[PATCH v2 1/3] Clean up
[PATCH v2 2/3] New tests
[PATCH v2 3/3] Implementation
+
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
--subject=<string>::
Specify the initial subject of the email thread.
Only necessary if --compose is also set. If --compose
is not set, this will be prompted for.
--to=<address>,...::
Specify the primary recipient of the emails generated. Generally, this
will be the upstream maintainer of the project involved. Default is the
value of the `sendemail.to` configuration value; if that is unspecified,
and --to-cmd is not specified, this will be prompted for.
+
This option may be specified multiple times.
--8bit-encoding=<encoding>::
When encountering a non-ASCII message or subject that does not
declare its encoding, add headers/quoting to indicate it is
encoded in <encoding>. Default is the value of the
'sendemail.assume8bitEncoding'; if that is unspecified, this
will be prompted for if any non-ASCII files are encountered.
+
Note that no attempts whatsoever are made to validate the encoding.
--compose-encoding=<encoding>::
Specify encoding of compose message. Default is the value of the
'sendemail.composeEncoding'; if that is unspecified, UTF-8 is assumed.
--transfer-encoding=(7bit|8bit|quoted-printable|base64|auto)::
Specify the transfer encoding to be used to send the message over SMTP.
7bit will fail upon encountering a non-ASCII message. quoted-printable
can be useful when the repository contains files that contain carriage
returns, but makes the raw patch email file (as saved from a MUA) much
harder to inspect manually. base64 is even more fool proof, but also
even more opaque. auto will use 8bit when possible, and quoted-printable
otherwise.
+
Default is the value of the `sendemail.transferEncoding` configuration
value; if that is unspecified, default to `auto`.
--xmailer::
--no-xmailer::
Add (or prevent adding) the "X-Mailer:" header. By default,
the header is added, but it can be turned off by setting the
`sendemail.xmailer` configuration variable to `false`.
Sending
~~~~~~~
--envelope-sender=<address>::
Specify the envelope sender used to send the emails.
This is useful if your default address is not the address that is
subscribed to a list. In order to use the 'From' address, set the
value to "auto". If you use the sendmail binary, you must have
suitable privileges for the -f parameter. Default is the value of the
`sendemail.envelopeSender` configuration variable; if that is
unspecified, choosing the envelope sender is left to your MTA.
--sendmail-cmd=<command>::
Specify a command to run to send the email. The command should
be sendmail-like; specifically, it must support the `-i` option.
The command will be executed in the shell if necessary. Default
is the value of `sendemail.sendmailCmd`. If unspecified, and if
--smtp-server is also unspecified, git-send-email will search
for `sendmail` in `/usr/sbin`, `/usr/lib` and $PATH.
--smtp-encryption=<encryption>::
Specify in what way encrypting begins for the SMTP connection.
Valid values are 'ssl' and 'tls'. Any other value reverts to plain
(unencrypted) SMTP, which defaults to port 25.
Despite the names, both values will use the same newer version of TLS,
but for historic reasons have these names. 'ssl' refers to "implicit"
encryption (sometimes called SMTPS), that uses port 465 by default.
'tls' refers to "explicit" encryption (often known as STARTTLS),
that uses port 25 by default. Other ports might be used by the SMTP
server, which are not the default. Commonly found alternative port for
'tls' and unencrypted is 587. You need to check your provider's
documentation or your server configuration to make sure
for your own case. Default is the value of `sendemail.smtpEncryption`.
--smtp-domain=<FQDN>::
Specifies the Fully Qualified Domain Name (FQDN) used in the
HELO/EHLO command to the SMTP server. Some servers require the
FQDN to match your IP address. If not set, git send-email attempts
to determine your FQDN automatically. Default is the value of
`sendemail.smtpDomain`.
--smtp-auth=<mechanisms>::
Whitespace-separated list of allowed SMTP-AUTH mechanisms. This setting
forces using only the listed mechanisms. Example:
+
------
$ git send-email --smtp-auth="PLAIN LOGIN GSSAPI" ...
------
+
If at least one of the specified mechanisms matches the ones advertised by the
SMTP server and if it is supported by the utilized SASL library, the mechanism
is used for authentication. If neither 'sendemail.smtpAuth' nor `--smtp-auth`
is specified, all mechanisms supported by the SASL library can be used. The
special value 'none' maybe specified to completely disable authentication
independently of `--smtp-user`
--smtp-pass[=<password>]::
Password for SMTP-AUTH. The argument is optional: If no
argument is specified, then the empty string is used as
the password. Default is the value of `sendemail.smtpPass`,
however `--smtp-pass` always overrides this value.
+
Furthermore, passwords need not be specified in configuration files
or on the command line. If a username has been specified (with
`--smtp-user` or a `sendemail.smtpUser`), but no password has been
specified (with `--smtp-pass` or `sendemail.smtpPass`), then
a password is obtained using 'git-credential'.
--no-smtp-auth::
Disable SMTP authentication. Short hand for `--smtp-auth=none`
--smtp-server=<host>::
If set, specifies the outgoing SMTP server to use (e.g.
`smtp.example.com` or a raw IP address). If unspecified, and if
`--sendmail-cmd` is also unspecified, the default is to search
for `sendmail` in `/usr/sbin`, `/usr/lib` and $PATH if such a
program is available, falling back to `localhost` otherwise.
+
For backward compatibility, this option can also specify a full pathname
of a sendmail-like program instead; the program must support the `-i`
option. This method does not support passing arguments or using plain
command names. For those use cases, consider using `--sendmail-cmd`
instead.
--smtp-server-port=<port>::
Specifies a port different from the default port (SMTP
servers typically listen to smtp port 25, but may also listen to
submission port 587, or the common SSL smtp port 465);
symbolic port names (e.g. "submission" instead of 587)
are also accepted. The port can also be set with the
`sendemail.smtpServerPort` configuration variable.
--smtp-server-option=<option>::
If set, specifies the outgoing SMTP server option to use.
Default value can be specified by the `sendemail.smtpServerOption`
configuration option.
+
The --smtp-server-option option must be repeated for each option you want
to pass to the server. Likewise, different lines in the configuration files
must be used for each option.
--smtp-ssl::
Legacy alias for '--smtp-encryption ssl'.
--smtp-ssl-cert-path::
Path to a store of trusted CA certificates for SMTP SSL/TLS
certificate validation (either a directory that has been processed
by 'c_rehash', or a single file containing one or more PEM format
certificates concatenated together: see verify(1) -CAfile and
-CApath for more information on these). Set it to an empty string
to disable certificate verification. Defaults to the value of the
`sendemail.smtpSSLCertPath` configuration variable, if set, or the
backing SSL library's compiled-in default otherwise (which should
be the best choice on most platforms).
--smtp-user=<user>::
Username for SMTP-AUTH. Default is the value of `sendemail.smtpUser`;
if a username is not specified (with `--smtp-user` or `sendemail.smtpUser`),
then authentication is not attempted.
--smtp-debug=(0|1)::
Enable (1) or disable (0) debug output. If enabled, SMTP
commands and replies will be printed. Useful to debug TLS
connection and authentication problems.
--batch-size=<num>::
Some email servers (e.g. smtp.163.com) limit the number emails to be
sent per session (connection) and this will lead to a failure when
sending many messages. With this option, send-email will disconnect after
sending $<num> messages and wait for a few seconds (see --relogin-delay)
and reconnect, to work around such a limit. You may want to
use some form of credential helper to avoid having to retype
your password every time this happens. Defaults to the
`sendemail.smtpBatchSize` configuration variable.
--relogin-delay=<int>::
Waiting $<int> seconds before reconnecting to SMTP server. Used together
with --batch-size option. Defaults to the `sendemail.smtpReloginDelay`
configuration variable.
Automating
~~~~~~~~~~
--no-to::
--no-cc::
--no-bcc::
Clears any list of "To:", "Cc:", "Bcc:" addresses previously
set via config.
--no-identity::
Clears the previously read value of `sendemail.identity` set
via config, if any.
--to-cmd=<command>::
Specify a command to execute once per patch file which
should generate patch file specific "To:" entries.
Output of this command must be single email address per line.
Default is the value of 'sendemail.toCmd' configuration value.
--cc-cmd=<command>::
Specify a command to execute once per patch file which
should generate patch file specific "Cc:" entries.
Output of this command must be single email address per line.
Default is the value of `sendemail.ccCmd` configuration value.
--header-cmd=<command>::
Specify a command that is executed once per outgoing message
and output RFC 2822 style header lines to be inserted into
them. When the `sendemail.headerCmd` configuration variable is
set, its value is always used. When --header-cmd is provided
at the command line, its value takes precedence over the
`sendemail.headerCmd` configuration variable.
--no-header-cmd::
Disable any header command in use.
--[no-]chain-reply-to::
If this is set, each email will be sent as a reply to the previous
email sent. If disabled with "--no-chain-reply-to", all emails after
the first will be sent as replies to the first email sent. When using
this, it is recommended that the first file given be an overview of the
entire patch series. Disabled by default, but the `sendemail.chainReplyTo`
configuration variable can be used to enable it.
--identity=<identity>::
A configuration identity. When given, causes values in the
'sendemail.<identity>' subsection to take precedence over
values in the 'sendemail' section. The default identity is
the value of `sendemail.identity`.
--[no-]signed-off-by-cc::
If this is set, add emails found in the `Signed-off-by` trailer or Cc: lines to the
cc list. Default is the value of `sendemail.signedOffByCc` configuration
value; if that is unspecified, default to --signed-off-by-cc.
--[no-]cc-cover::
If this is set, emails found in Cc: headers in the first patch of
the series (typically the cover letter) are added to the cc list
for each email set. Default is the value of 'sendemail.ccCover'
configuration value; if that is unspecified, default to --no-cc-cover.
--[no-]to-cover::
If this is set, emails found in To: headers in the first patch of
the series (typically the cover letter) are added to the to list
for each email set. Default is the value of 'sendemail.toCover'
configuration value; if that is unspecified, default to --no-to-cover.
--suppress-cc=<category>::
Specify an additional category of recipients to suppress the
auto-cc of:
+
--
- 'author' will avoid including the patch author.
- 'self' will avoid including the sender.
- 'cc' will avoid including anyone mentioned in Cc lines in the patch header
except for self (use 'self' for that).
- 'bodycc' will avoid including anyone mentioned in Cc lines in the
patch body (commit message) except for self (use 'self' for that).
- 'sob' will avoid including anyone mentioned in the Signed-off-by trailers except
for self (use 'self' for that).
- 'misc-by' will avoid including anyone mentioned in Acked-by,
Reviewed-by, Tested-by and other "-by" lines in the patch body,
except Signed-off-by (use 'sob' for that).
- 'cccmd' will avoid running the --cc-cmd.
- 'body' is equivalent to 'sob' + 'bodycc' + 'misc-by'.
- 'all' will suppress all auto cc values.
--
+
Default is the value of `sendemail.suppressCc` configuration value; if
that is unspecified, default to 'self' if --suppress-from is
specified, as well as 'body' if --no-signed-off-cc is specified.
--[no-]suppress-from::
If this is set, do not add the From: address to the cc: list.
Default is the value of `sendemail.suppressFrom` configuration
value; if that is unspecified, default to --no-suppress-from.
--[no-]thread::
If this is set, the In-Reply-To and References headers will be
added to each email sent. Whether each mail refers to the
previous email (`deep` threading per 'git format-patch'
wording) or to the first email (`shallow` threading) is
governed by "--[no-]chain-reply-to".
+
If disabled with "--no-thread", those headers will not be added
(unless specified with --in-reply-to). Default is the value of the
`sendemail.thread` configuration value; if that is unspecified,
default to --thread.
+
It is up to the user to ensure that no In-Reply-To header already
exists when 'git send-email' is asked to add it (especially note that
'git format-patch' can be configured to do the threading itself).
Failure to do so may not produce the expected result in the
recipient's MUA.
--[no-]mailmap::
Use the mailmap file (see linkgit:gitmailmap[5]) to map all
addresses to their canonical real name and email address. Additional
mailmap data specific to git-send-email may be provided using the
`sendemail.mailmap.file` or `sendemail.mailmap.blob` configuration
values. Defaults to `sendemail.mailmap`.
Administering
~~~~~~~~~~~~~
--confirm=<mode>::
Confirm just before sending:
+
--
- 'always' will always confirm before sending
- 'never' will never confirm before sending
- 'cc' will confirm before sending when send-email has automatically
added addresses from the patch to the Cc list
- 'compose' will confirm before sending the first message when using --compose.
- 'auto' is equivalent to 'cc' + 'compose'
--
+
Default is the value of `sendemail.confirm` configuration value; if that
is unspecified, default to 'auto' unless any of the suppress options
have been specified, in which case default to 'compose'.
--dry-run::
Do everything except actually send the emails.
--[no-]format-patch::
When an argument may be understood either as a reference or as a file name,
choose to understand it as a format-patch argument (`--format-patch`)
or as a file name (`--no-format-patch`). By default, when such a conflict
occurs, git send-email will fail.
--quiet::
Make git-send-email less verbose. One line per email should be
all that is output.
--[no-]validate::
Perform sanity checks on patches.
Currently, validation means the following:
+
--
* Invoke the sendemail-validate hook if present (see linkgit:githooks[5]).
* Warn of patches that contain lines longer than
998 characters unless a suitable transfer encoding
('auto', 'base64', or 'quoted-printable') is used;
this is due to SMTP limits as described by
https://www.ietf.org/rfc/rfc5322.txt.
--
+
Default is the value of `sendemail.validate`; if this is not set,
default to `--validate`.
--force::
Send emails even if safety checks would prevent it.
Information
~~~~~~~~~~~
--dump-aliases::
Instead of the normal operation, dump the shorthand alias names from
the configured alias file(s), one per line in alphabetical order. Note
that this only includes the alias name and not its expanded email addresses.
See 'sendemail.aliasesFile' for more information about aliases.
--translate-aliases::
Instead of the normal operation, read from standard input and
interpret each line as an email alias. Translate it according to the
configured alias file(s). Output each translated name and email
address to standard output, one per line. See 'sendemail.aliasFile'
for more information about aliases.
CONFIGURATION
-------------
include::includes/cmd-config-section-all.txt[]
include::config/sendemail.txt[]
EXAMPLES
--------
Use gmail as the smtp server
~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To use 'git send-email' to send your patches through the GMail SMTP server,
edit ~/.gitconfig to specify your account settings:
----
[sendemail]
smtpEncryption = tls
smtpServer = smtp.gmail.com
smtpUser = [email protected]
smtpServerPort = 587
----
If you have multi-factor authentication set up on your Gmail account, you can
generate an app-specific password for use with 'git send-email'. Visit
https://security.google.com/settings/security/apppasswords to create it.
Once your commits are ready to be sent to the mailing list, run the
following commands:
$ git format-patch --cover-letter -M origin/master -o outgoing/
$ edit outgoing/0000-*
$ git send-email outgoing/*
The first time you run it, you will be prompted for your credentials. Enter the
app-specific or your regular password as appropriate. If you have credential
helper configured (see linkgit:git-credential[1]), the password will be saved in
the credential store so you won't have to type it the next time.
Note: the following core Perl modules that may be installed with your
distribution of Perl are required:
MIME::Base64, MIME::QuotedPrint, Net::Domain and Net::SMTP.
These additional Perl modules are also required:
Authen::SASL and Mail::Address.
SEE ALSO
--------
linkgit:git-format-patch[1], linkgit:git-imap-send[1], mbox(5)
GIT
---
Part of the linkgit:git[1] suite
Codebase Browser
git